Who is in the 100,000 mile club?
1999 F-150, 182,000 miles. I did have a freeze plug blow out about 3000 miles ago, but other than normal plugs, tires, brakes, battery... replacement. I have had no major failures. Knock on wood.
98' Expedition w/ 4.6, bought in March of this yr with 104,xxx on it, and just passed 126k on the way to work this morning. Only major issue so far was the heater core a few weeks ago. Let me tell you what a headache that was.
not quite up there with Bent6 but I have just over 250,000km on my baby, the only thing that really bugs me is the broken manifold bolt on the passenger side, other than that it's been a pretty damn good truck.
Flipped over 100k last week. Now it won't hold an idle. Idle is about 400 and acts like a jake brake when I get off the gas. After some reading on hear I'm headed back outside to pull off the IAC and clean it.
Originally Posted by want2race
Flipped over 100k last week. Now it won't hold an idle. Idle is about 400 and acts like a jake brake when I get off the gas. After some reading on hear I'm headed back outside to pull off the IAC and clean it.
Oh, and my 99 5.4 just clicked on 189K and still runs smooth. Even better with all new COPs.
This summer had front-end rebuilt (pretty much everything up there) and new U-joints. Other than that just the usual tune up stuff.
Sled...
I just sold my '01 and bought a brand new '07 SC xlt,w/5.4, tow,LSD. My old truck was very dependable, very durable in both performance and reliability. The only work performed under the hood since I bought it new has been oil changes to engine,brake master cyl,steering pump,trans/converter. I did change antifreeze and plugs several times. Nothing else was ever replaced or changed,ie,belt,coils,hoses,a/c or any other engine, or drivetrain parts.
Of course I did several brake jobs, changed rotors a few times, new ball joints. Truck runs great but needs more front end work. I sold and gave buyer some of the new front end parts I bought from rockauto.
Of course I did several brake jobs, changed rotors a few times, new ball joints. Truck runs great but needs more front end work. I sold and gave buyer some of the new front end parts I bought from rockauto.


