Project GO FAST is now in progress!!!
Senior Member
Joined: Mar 2005
Posts: 5,843
Likes: 0
From: St. Charles, MO
Originally Posted by PSS-Mag
If you go to Rogersville one of those days in November, then I'd meet up with ya. If zairman wanted to be there too then he could drive to my house and ride with me the rest of the way there.
Senior Member
Joined: Dec 2004
Posts: 891
Likes: 1
From: Lost some where in the middle of the Ozark Mountains!
Originally Posted by Zaairman
Where is Rogersville?
For us we'd take I44 to either take the Marshfield exit and take Hwy A out of marshfield to Hwy 60 then 60 to rogersville.... or I44 to hwy 65(schoolcraft freeway) in springfiled, take 65 south towards branson to 60 then 60 east torwards cabool to rogersville
Senior Member
Joined: Oct 2006
Posts: 1,158
Likes: 0
From: Columbia, Missouri
Originally Posted by PSS-Mag
You NEED to do it baaaddd.......... Like this winter... like starting in a few weeks.
Senior Member
Joined: Dec 2004
Posts: 891
Likes: 1
From: Lost some where in the middle of the Ozark Mountains!
Originally Posted by 1fast4.6
haha easier said than done! im in kentucky right now at the Zo6 fest
Senior Member
Joined: Dec 2004
Posts: 891
Likes: 1
From: Lost some where in the middle of the Ozark Mountains!
Rogersville isn't to far from 1fast4.6 either.... maybe if you do it in November then we'll just have a Missouri meet at Ozark International Raceway to see built's truck run, and we could all get it on video.... then after the test and tune at the track we could go to hooters or adult entertainment facility, (either one are literally just down the road) and have some cold drinks. 
Thread Starter
|
Senior Member
Joined: Jul 2006
Posts: 6,282
Likes: 1
From: Farmington, MO
Ok, I can go WOT now! Got my tune almost all the way dialed in, wont know for sure until I get my wideband completely fixed. I got my laptop, got the datalogging going and stopped on the highway, regardless of traction, I wanted to log it from a dig, and to see what it would do. Stalled it to 2100, nailed it, spun all the way through first, got to 98mph in 10 seconds flat! I cant wait to get the slicks on and take it to the track. I'm thinking about making a trip to st.louis saturday morning to dyno it. just under 2 hours, but i really want/need to do it!
Senior Member
Joined: Oct 2006
Posts: 1,158
Likes: 0
From: Columbia, Missouri
Originally Posted by PSS-Mag
Just have the engine sent to my house and set up an account at Orielys and Jegs and any other place(s) that I might need, that I can charge parts/tools to you for it. Then I'll go get your truck, and get started on it for you.
Senior Member
Joined: Dec 2004
Posts: 891
Likes: 1
From: Lost some where in the middle of the Ozark Mountains!
Originally Posted by 1fast4.6
haha ill be fabricating more stuff than ordering parts :P
Thats the crap that adds up in cost both in the parts and trips to the store just to get $2 of hardware......
Senior Member
Joined: Mar 2005
Posts: 5,843
Likes: 0
From: St. Charles, MO
Originally Posted by built54
Ok, I can go WOT now! Got my tune almost all the way dialed in, wont know for sure until I get my wideband completely fixed. I got my laptop, got the datalogging going and stopped on the highway, regardless of traction, I wanted to log it from a dig, and to see what it would do. Stalled it to 2100, nailed it, spun all the way through first, got to 98mph in 10 seconds flat! I cant wait to get the slicks on and take it to the track. I'm thinking about making a trip to st.louis saturday morning to dyno it. just under 2 hours, but i really want/need to do it!
Senior Member
Joined: Feb 2004
Posts: 10,390
Likes: 10
Originally Posted by built54
Ok, I can go WOT now! Got my tune almost all the way dialed in, wont know for sure until I get my wideband completely fixed. I got my laptop, got the datalogging going and stopped on the highway, regardless of traction, I wanted to log it from a dig, and to see what it would do. Stalled it to 2100, nailed it, spun all the way through first, got to 98mph in 10 seconds flat! I cant wait to get the slicks on and take it to the track. I'm thinking about making a trip to st.louis saturday morning to dyno it. just under 2 hours, but i really want/need to do it!
Glad you got yer wideband sorted out - kindas crucial piece of instrumentation.
MGD
Thread Starter
|
Senior Member
Joined: Jul 2006
Posts: 6,282
Likes: 1
From: Farmington, MO
im going to Mustang Muscle, they have a dynojet. I Think it was $45 for 3 runs.
http://www.mustangmuscleonline.com/
http://www.mustangmuscleonline.com/
Last edited by built54; Oct 19, 2007 at 08:23 AM.