how fast does a v6 go
Originally Posted by XanMan
Try 139 MPH. 405 HP. at the flywheel 333 HP. at the rear wheels. And I built it myself.


Last edited by STOMPTHECHEVY; Jan 15, 2006 at 09:19 PM.
Originally Posted by mountaineer02v8
why would u guys Mod a V-6 in a truck? I'd be a shame to have a v-6 as a truck
You just don't know what it is, to make slow vehicles move faster. Plus, you learn while u do it.
Originally Posted by STOMPTHECHEVY
HAHA!!! Well........Different reasons. Eveyone knows how the V6 sounds like, and looks. And yes they are really slow stock. I like to call mine a sleeper truck. It will dust non supercharged V8's, trucks with no problem.. ANd sh!it on suv's.!!!
You just don't know what it is, to make slow vehicles move faster. Plus, you learn while u do it.
You just don't know what it is, to make slow vehicles move faster. Plus, you learn while u do it.
. Or lets get in the grass and tie up. I'll drag your truck till I run out of gas...
Originally Posted by 98Lariet4x4
Yeah, you might dust me on the street. However, I'll race you. Just let me pick the course...
. Or lets get in the grass and tie up. I'll drag your truck till I run out of gas... 
. Or lets get in the grass and tie up. I'll drag your truck till I run out of gas... 
COURSE!! are u talking bout some hill billy off road stuff???? NO THANKS... Im to clean in my truck for that. Quarter miles?. All day Hommie!!! THen u'll really run out to gas trying for dear life to catch up. HAHA!
Originally Posted by 98Lariet4x4
Nope, no hillbilly here. Redneck, well I've been accused of that a time or two, but not hillbilly. 

HAHA, that's cool hommie. MY mods are...
Air Intake, Cold Air Kit, M.a.f.s, Throttle Body Spc, Turbonator, Fuel Inj And Fuel Pump, Headers, No Catalatyc Conv, Y Pipe, Dual Exh, Powertrac Positrac unit, 410 Gear Ratio,electric turbo, Aluminum Drive Shaft, New Tranny With hurst stick Shift Kit, Centerforce Stage 1 Clutch=and Throwout Bearing, Light Weight Flywheel, Pulleys, Stage III Jet Chip, 75 Shot Of NitrouS, Shaved Heads For Better Compression, 20'' Wheels On Yokohama, 16'' Rims For Tearing Up The Street and track, LImo tint, sick sound system, Xtang bed cover, hood scoops, tail gate wing. shaved off F150 emblems on side. etc etc
It's taken me around 3YRS, and lots of that good military money!!

https://www.f150online.com/galleries....cfm?gnum=6980
Last edited by STOMPTHECHEVY; Jan 15, 2006 at 06:26 PM.
If someone irritates you enough with sophmoric behavior, just click on their screen name, select "View public profile", and select the "Add <screenname> to your ignore list" where <screenname> is the miscreant to be ignored.
You won't be bothered in the future by silly stuff from them.
Works for me.
Steve
You won't be bothered in the future by silly stuff from them.
Works for me.
Steve
Last edited by projectSHO89; Jan 15, 2006 at 06:43 PM.
Originally Posted by projectSHO89
If someone irritates you enough with sophmoric behavior, just click on theer screen name and select the "Add to your ignore list".
You won't be bothered in the future by silly stuff from them.
Works for me.
Steve
You won't be bothered in the future by silly stuff from them.
Works for me.
Steve
Zaairman,
That is a picture of my 99 F150 4.2 L. 4x4. My whole build was documented on this forum. In short I was running 12 LB. of boost on custom intake, headers, 32 lb. injectors, custom exaust with crossover, custom MAS air meter,Boost gauge, air/fuel gauge.And all of the other little parts that go with it.
I built all the brackets intake pipes and exaust from scratch!
The truck went from 0 to 60 in 6.9 seconds and it's four wheel drive don't forget.
If you have any doubt ask Mike Troyer, He set up the Dyno pulls at Superchips. Jay was the one who did most of the tuning on it.
That is a picture of my 99 F150 4.2 L. 4x4. My whole build was documented on this forum. In short I was running 12 LB. of boost on custom intake, headers, 32 lb. injectors, custom exaust with crossover, custom MAS air meter,Boost gauge, air/fuel gauge.And all of the other little parts that go with it.
I built all the brackets intake pipes and exaust from scratch!
The truck went from 0 to 60 in 6.9 seconds and it's four wheel drive don't forget.
If you have any doubt ask Mike Troyer, He set up the Dyno pulls at Superchips. Jay was the one who did most of the tuning on it.




popcorn fight!