Power Folding Mirror Install on F150
#106
Nope!
Just stopped at the dealership today to copy the diagrams.
Page 124-1 is a full diagram, and page 124-2 is a full diagram but says "If equiped" in the upper left. It also has a connector not on the other diagram.
Will post pics of the digrams to my gallery as soon as I get a chance.
If you look at page 124-2 on the right side between the mirror "boxes" there is a splice ( S503 ) then a connector ( C2108 ) marked pin 3, then another connector ( C2509 ) also marked pin 3, then into a another splice ( S603 ).
It appears to be a connector for the passanger power mirror motor, but I'll have to trace it further to be sure just what it does.
Just stopped at the dealership today to copy the diagrams.
Page 124-1 is a full diagram, and page 124-2 is a full diagram but says "If equiped" in the upper left. It also has a connector not on the other diagram.
Will post pics of the digrams to my gallery as soon as I get a chance.
If you look at page 124-2 on the right side between the mirror "boxes" there is a splice ( S503 ) then a connector ( C2108 ) marked pin 3, then another connector ( C2509 ) also marked pin 3, then into a another splice ( S603 ).
It appears to be a connector for the passanger power mirror motor, but I'll have to trace it further to be sure just what it does.
#107
#108
#111
#112
#114
The accidental discovery !!!
Got real feed up with the problems and got out the volt meter. Can't seem to get any power from pin 4 when I pull back on the **** ( rearward ) as my owners manual says.
Just by accident I PUSH the **** FORWARD and I got power !!!
Think someone is dislexic ??? or maybe the switch was in another position in a previous version and nobody changed the instructions when they changed the switch. I'm going to drop a line in the king ranch forum and ask which way they push the **** for power fold, anybody whant to bet on the response???
Got real feed up with the problems and got out the volt meter. Can't seem to get any power from pin 4 when I pull back on the **** ( rearward ) as my owners manual says.
Just by accident I PUSH the **** FORWARD and I got power !!!
Think someone is dislexic ??? or maybe the switch was in another position in a previous version and nobody changed the instructions when they changed the switch. I'm going to drop a line in the king ranch forum and ask which way they push the **** for power fold, anybody whant to bet on the response???
#116
#117
#119
Got a response from the king ranch forum, he says it is on the rearward pull they activate.
Has anybody checked to see if it's a different switch between the king ranch and the rest of us?
It could be, there are two different mirror sets with the power fold depending on the build date that aren't specified in the wiring diagrams. Might be a different switch with the king ranch. Might even light up for all we know!
Has anybody checked to see if it's a different switch between the king ranch and the rest of us?
It could be, there are two different mirror sets with the power fold depending on the build date that aren't specified in the wiring diagrams. Might be a different switch with the king ranch. Might even light up for all we know!
#120