My install experience - long writeup
Amp Rack...
Well I guess it is time to update my build thread.
As I have been eluding to I added a third amp, Sundown SAX 125.2. and went active with my front stage.
I am running the Focal TNB tweeters off the Clarion XH5410 front channels at 75 watts when at full tilt. I have them high passed around 3500Hz.
The Sundown SAZ-125.2 is sending all the power it can to the Massive Ck6 mids. I have them bandpassed at 92Hz and 3200Hz.
I replaced the 4ga power and ground runs. With the reassurance of a fellow member, I was able to fit the 1/0 gauge through the same factory grommet that I used for the 4ga.
Replaced all fuse blocks and inline fuses. Made a little custom inline fuse holder that mounts to the back of the battery box. I am going for stealth. Even wrapped the cable sheathing in electrical tape to make it look more like the factory.
Made a new amp rack, actually 3 before I got it to where it is and still not happy with it.
Next steps are to carpet the amp rack and finish deading/sealing the front doors.
Here are some picks.
Parts to install






Power and Inline fuse.







Amp Rack




As I have been eluding to I added a third amp, Sundown SAX 125.2. and went active with my front stage.
I am running the Focal TNB tweeters off the Clarion XH5410 front channels at 75 watts when at full tilt. I have them high passed around 3500Hz.
The Sundown SAZ-125.2 is sending all the power it can to the Massive Ck6 mids. I have them bandpassed at 92Hz and 3200Hz.
I replaced the 4ga power and ground runs. With the reassurance of a fellow member, I was able to fit the 1/0 gauge through the same factory grommet that I used for the 4ga.
Replaced all fuse blocks and inline fuses. Made a little custom inline fuse holder that mounts to the back of the battery box. I am going for stealth. Even wrapped the cable sheathing in electrical tape to make it look more like the factory.
Made a new amp rack, actually 3 before I got it to where it is and still not happy with it.

Next steps are to carpet the amp rack and finish deading/sealing the front doors.
Here are some picks.
Parts to install






Power and Inline fuse.







Amp Rack






