Styxnpicks install progress thread
#67
#68
#72
initial box plans are done, I havnt modeled the hump or seat bracket yet but here it is:
I would put a few more hours in the sketch but I got the jist of it, clearance is TIGHT!!!, I will have 4 8's with a mounting depth of 4.5 in there tho with no seat lift, I also have to keep some room for that 14.1mm of xmax
I would put a few more hours in the sketch but I got the jist of it, clearance is TIGHT!!!, I will have 4 8's with a mounting depth of 4.5 in there tho with no seat lift, I also have to keep some room for that 14.1mm of xmax
Last edited by styxnpicks; 05-19-2007 at 07:32 PM.
#75