Wiring Harness for Audiophile
Junior Member
Joined: Apr 2005
Posts: 7
Likes: 0
From: San Antonio, Texas
Originally posted by FordNoobie
ericd - check your email
SATX04F150CB - I thought about making up several harnesses and selling them on ebay, but I wasn't for sure what the demand would be. Also, my time is pretty limited right now. What would you guys be willing to pay for a pre-made harness?
ericd - check your email
SATX04F150CB - I thought about making up several harnesses and selling them on ebay, but I wasn't for sure what the demand would be. Also, my time is pretty limited right now. What would you guys be willing to pay for a pre-made harness?
1. Price of parts (Connectors, wires)
2. Price for your labor ($20 - $25 per hour)
3. Shipping cost (materials to ship)
4. If list on EBay; set a reserve price (the least amount you will accept without taking a loss)
Last edited by SATX04F150CB; Apr 28, 2005 at 10:22 PM.
Junior Member
Joined: Apr 2005
Posts: 3
Likes: 0
audiophile swap out
does anyone know where i will find the conn for the head unit when swapping the std 6d in dash that came on my '04 lariat? I found the conn. for the amp under the rear seat, but haven't found the one for the head unit after pulling the unit it came with out. Is there a chance the harness that was on my unit will power up the amp just as it is? The unit that was in there had 2 places to connect to, but only one actually was being utilized when i pulled it out , and it worked steering wheel controls and all, any advice sure would be appreciated
If anyone makes the complete wire harness that connects the HD unit to the AMP/Subwoofer please e-mail me.
Member
Joined: Mar 2005
Posts: 16
Likes: 0
From: OSSINING, NY
Can yoiu e-mail me the TIF file??
Originally posted by FordNoobie
It took me a while to figure out how to get a picture on this site, so I may not have done everything correctly. The picture was an 8.5"x11" TIF file. I had to convert to a JPG in order to post on this site, but it still should have been 8.5"x11". Have you tried opening in an imaging program and enlarging before printing? Is there anything in particular you have a question about?
FYI, I made a harness today and hooked everything up. It worked like a champ and I am satisfied with the outcome. I wasn't looking for anything that would rattle the windows, but that sub can really rock if you want it to and I was impressed with the sound quality coming from a factory system.
FordNoobie
It took me a while to figure out how to get a picture on this site, so I may not have done everything correctly. The picture was an 8.5"x11" TIF file. I had to convert to a JPG in order to post on this site, but it still should have been 8.5"x11". Have you tried opening in an imaging program and enlarging before printing? Is there anything in particular you have a question about?
FYI, I made a harness today and hooked everything up. It worked like a champ and I am satisfied with the outcome. I wasn't looking for anything that would rattle the windows, but that sub can really rock if you want it to and I was impressed with the sound quality coming from a factory system.
FordNoobie
I have been reading on this subject because I want to add the factory sub to my radio. Do you think You can emailme those TIF files? I've tried to read your photos but I couldn't but i know how to work with TIFs I fyou could I'll appretiate it.
Thanks!!
leonardolenis@hotmail.com
P.D. Can you also check this:
https://www.f150online.com/forums/sh...hreadid=196940
Junior Member
Joined: Apr 2005
Posts: 5
Likes: 0
audiophile HU
Originally Posted by Fordllllllllll
Anybody looking for a audiophile mp3 head unit?I bought one off Ebay for a 05 superduty and the mounting brackets are different,it will only fit in a 04 or 05 f150.I just want my money back,$200 shipped
thanks, spike
Member
Joined: Jun 2005
Posts: 39
Likes: 0
I just purchesd a shaker 500 off ebay is this the same as the audiofile? It has 3 plugs on the back. also I have the steering wheel controls and only the large plug was in. now I want the sub but I also need the wiring. I will check under the carpet tomorrow. I have a 05 lariot crew doe's anyone know how to get the door panels off?.
Junior Member
Joined: Apr 2006
Posts: 1
Likes: 0
From: Illinois
Wire Harness
On the 6 disc cd changer in my truck, there is no sub out on it. And I am wanting to get me that audiophile sub to put under my back seat. Is there a way I can get the wiring connector that plugs into the sub (3U2Z-14S411-CAAA) and wire it up to my head unit some how?Thanx
Senior Member
Joined: Jul 2005
Posts: 1,557
Likes: 1
From: Chesterfield,Va.
Originally Posted by jwt98
On the 6 disc cd changer in my truck, there is no sub out on it. And I am wanting to get me that audiophile sub to put under my back seat. Is there a way I can get the wiring connector that plugs into the sub (3U2Z-14S411-CAAA) and wire it up to my head unit some how?Thanx
You will have to change the factory (two plug) nonaudiophile HU to an factory (three plug) audiophile HU and make a harness to the sub......
the plugs are avalible at the ford dealer (someone posted the part number a while back and they have to be ordered) search button is you best friend....
Junior Member
Joined: Jan 2008
Posts: 10
Likes: 0
How much ?
Originally Posted by FordNoobie
ericd - check your email
SATX04F150CB - I thought about making up several harnesses and selling them on ebay, but I wasn't for sure what the demand would be. Also, my time is pretty limited right now. What would you guys be willing to pay for a pre-made harness?
SATX04F150CB - I thought about making up several harnesses and selling them on ebay, but I wasn't for sure what the demand would be. Also, my time is pretty limited right now. What would you guys be willing to pay for a pre-made harness?
I have the connectors, any one can do the job ? How much ? Thanks
Last edited by richy9612; Jan 14, 2008 at 09:55 PM.
Junior Member
Joined: Jan 2008
Posts: 10
Likes: 0
have the connectors, any one can do the job ? How much ?
Originally Posted by SATX04F150CB
I guess the best way to determine the price is by using this formula;
1. Price of parts (Connectors, wires)
2. Price for your labor ($20 - $25 per hour)
3. Shipping cost (materials to ship)
4. If list on EBay; set a reserve price (the least amount you will accept without taking a loss)
1. Price of parts (Connectors, wires)
2. Price for your labor ($20 - $25 per hour)
3. Shipping cost (materials to ship)
4. If list on EBay; set a reserve price (the least amount you will accept without taking a loss)
I have the connectors, any one can do the job ? How much ? Thanks
Junior Member
Joined: Jan 2008
Posts: 10
Likes: 0
audiophile head units
Have 2 audiophile head units and OEM subwoofer with amp (like new). OEM ford GPS unit (new and used).
Can make the harness for subwoofer if don't have from the factory. Was looking to buy, but made it my self and works GREAT !
for harness : https://www.f150online.com/galleries...094&anum=15565
for 6cd/mp3 radio: https://www.f150online.com/galleries...095&anum=15565
Can make the harness for subwoofer if don't have from the factory. Was looking to buy, but made it my self and works GREAT !
for harness : https://www.f150online.com/galleries...094&anum=15565
for 6cd/mp3 radio: https://www.f150online.com/galleries...095&anum=15565
Last edited by richy9612; Jan 20, 2008 at 10:19 PM. Reason: pics !
Junior Member
Joined: Jan 2008
Posts: 5
Likes: 0
I just ordered a Audiophile on ebay and did a search on the idea of adding a sub. This thread answered all my questions and more.
Thanks guys for the great info.
Richy9612, do you still have the factory sub available?
Might be interested in the cable, did you use twisted shielded cables like someone suggested?
Let me know how much you want for the sub and wiring harness. (not sure if I need the harness yet, but now I know where to look. 8)
sfonn2-765@yahoo.com
2004 F150 Lariat
Thanks
Thanks guys for the great info.
Richy9612, do you still have the factory sub available?
Might be interested in the cable, did you use twisted shielded cables like someone suggested?
Let me know how much you want for the sub and wiring harness. (not sure if I need the harness yet, but now I know where to look. 8)
sfonn2-765@yahoo.com
2004 F150 Lariat
Thanks