Gunny when you get your edge in go get it tuned at sunshine here in killeen its across the street from killeen high school... they will do you right there good people and while your there ask them about the supercharged ram hemi they tuned on.... It's my bros and they worked some kind of magic.

 

Got my Edge today. Downloaded the lastest Lightning software and then connected the Edge and updated the firmware, Ver 22, build 27 was the lastest I could get.

Installed in truck, loaded Level 2 and took it for a test drive. No DTC's, no issues. Pretty good improvement, truck screams in mid range now. I think I need to bump up the 3-4 shift rpm. Shifted to soon at about 80 mph.

My stock hex is RXDG3BA

So far no issues with a 2007

.

 

where do you see ver 22 on the lightning software?

 

Hi Gunny;

That's good news. Please don't bump up the 3>4 shift above 4800 rpm, to be safe for the tranny ( the TC actually). 1>2 5400, 2>3 5300 are fine.

Cheers
bubba

 

It was the first option in that column, you might have to scroll up to it.



Thanks.
Maybe it's where it should be then. I'll watch the tach and check. Just seemed to shift too early in the power band.
Guess I'm used to my Motorcycle...

 

Gunny - perhaps set up an RPM PID on the display to check; the factory tach is notorious for being laggardly

I hear ya about the motorcycle

cheers
bubba

 

Is this version listed as "unstable"? If so, when you talked to Edge, did they say anything about using the unstable versions?

 

The only updates available on the lightning software are labeled Stable. As of 4-18 you only have 1 firmware and 1 calibration

 

hmm. I just tried it today and I still showed the new ones as unstable. Does my lightning program need to be updated or something? The last things I show as a "release" version are firmware ver. 20 and calibration ver. 21, which is what I was running until I bought my '07.

 

As of yesterday both the firmware v22 and calibration v27 are listed as unstable

 

Okay, thats what I though.. I just don't feel comfortable running a program that says "unstable". I guess I'll just continue to use the Edge as a guage pod until they release a stable claibration.

 

I got mine in Phoenix, AZ. I moved from AZ to TX a couple of months ago. Thats how my wife "let" me buy a new truck.

 

That's what I am running in mine.

So far no problems. I ran it pretty hard yesterday and then again today on the hiway, no issues.

I talked to tech support and they said they are labeled as "Unstable" until it's downloaded over 1,000 times without any issues.
That doesnt pass my common sense test, that's what Beta is all about.

But, bottom line, it works in my 07.

 

Well i bought the Edge today, and I will be returning it Monday.

When i installed their software on my computer, everything seemed okay, but when i did their updates, their software no longer recognized my programmer.

I searched all over their website for anything that could possibly help me figure out what the problem might be, without finding any information regarding installing or trouble shooting problems.

I have very little faith in the Edge if their software does not even work on my $1000 computer. I would hate to know what their programmer will do to my $50000 truck.

Considering they have a website, and they sell their products on the net, you would think they would make sure they offer some trouble shooting tips somewhere.

 

I would at least give them a call and see if they can figure it out. Are you using XP or Vista?

As I stated in the above posts, it worked for me. I run Windows XP and installed everything just fine.

Are you using a USB hub for the cable? If so try a direct connection to the computer.

G