problem with system.
what if he adds a second sub, wouldny 4 ohm be best
Last edited by JJDH; Apr 16, 2009 at 07:15 PM.
i know this is extrememly off topic right now, esp since my system still isnt working, but since im searching for a new sub, i figured i would ask if a capacitor would make the system sound better, or run more efficient
No
dont even worry bout that NO is the answer, they are a great boat anchor though
Last edited by JJDH; Apr 16, 2009 at 07:21 PM.
could you wire two subs to the single channel amp? wouldnt it cut down on the power? i would love to run two subs!
of course u can put 2 subson a mono amp. with two 4 ohm svc subs your impedience would be 2 ohms, u have to ;ook at ur amp to see what it puts out at that level
no capacitor unless you want something for target practice or just want to pay alot of money for some pretty led lights and a voltage gage.
your kicker kx 600.1 puts out 600w rms at 2 ohms. to run i sub 600wrms get a single voice coil 2 ohm or get a dual voice coil 4 ohm. to run 2 subs get 2 single coil 4 ohm subs rated around 300w rms , or 2 subs dual voice coil 2 ohms 300 w rms each
your kicker kx 600.1 puts out 600w rms at 2 ohms. to run i sub 600wrms get a single voice coil 2 ohm or get a dual voice coil 4 ohm. to run 2 subs get 2 single coil 4 ohm subs rated around 300w rms , or 2 subs dual voice coil 2 ohms 300 w rms each
Last edited by jrfonte; Apr 16, 2009 at 08:45 PM.
so would that sub i posted earlier, the kicker compvr
heres the specs:
Size (IN.,CM) 10, 25.4
Impedance (OHMS) 2 or 4 DVC
Max Rec Amplifier Power (WATTS PEAK/RMS)* 800/400
Sensitivity (dB 1w/1m) 85.5
Frequency Response (Hz) 25-500
Mounting Depth (IN.,CM) 5 9/16, 14.1
Mounting Cutout (IN.,CM) 9 1/4, 23.5
Min Rec Sealed Box Volume (CU. FT., Liters) 0.8, 22.7
Max Rec Sealed Box Volume (CU. FT., Liters) 3, 85
Min Rec Vented Box Volume (CU. Ft., Liters)** 1.25, 35.4
Max Rec Vented Box Volume (CU. Ft., Liters)** 1.75, 49.6
heres the specs:
Size (IN.,CM) 10, 25.4
Impedance (OHMS) 2 or 4 DVC
Max Rec Amplifier Power (WATTS PEAK/RMS)* 800/400
Sensitivity (dB 1w/1m) 85.5
Frequency Response (Hz) 25-500
Mounting Depth (IN.,CM) 5 9/16, 14.1
Mounting Cutout (IN.,CM) 9 1/4, 23.5
Min Rec Sealed Box Volume (CU. FT., Liters) 0.8, 22.7
Max Rec Sealed Box Volume (CU. FT., Liters) 3, 85
Min Rec Vented Box Volume (CU. Ft., Liters)** 1.25, 35.4
Max Rec Vented Box Volume (CU. Ft., Liters)** 1.75, 49.6



