Flow through console and shifter conversion.
Senior Member
Joined: Feb 1999
Posts: 1,209
Likes: 0
From: Baton Rouge, La
Originally Posted by jc1999
ok, I have a screw with buckets from the factory, it has teh fixed console in the center but its "halfway" to the dash. If I wanted to do this mod, I dont have to touch the dash?
Not the way he did it.
Thread Starter
|
Member
Joined: Aug 2005
Posts: 95
Likes: 1
From: Ohio
Originally Posted by jc1999
ok, I have a screw with buckets from the factory, it has teh fixed console in the center but its "halfway" to the dash. If I wanted to do this mod, I dont have to touch the dash?
Last edited by FX4andHARLEY; Nov 2, 2005 at 08:51 PM.
Thread Starter
|
Member
Joined: Aug 2005
Posts: 95
Likes: 1
From: Ohio
Originally Posted by freekyFX4
So, you installed a flow-thru console on a truck with no back seat? Did you connect the ducts or leave them blocked? I only ask since it seems strange to blow hot/cold air back there where nobody can sit! 
I definitely understand why you put the console in though...I love mine!
I definitely understand why you put the console in though...I love mine!
Thread Starter
|
Member
Joined: Aug 2005
Posts: 95
Likes: 1
From: Ohio
Originally Posted by Tyrod88
Nice truck 
i have a black 2005 FX4 supercrew and i really like the Harley davidson headlights i was wondering where you got them from and if they would work for my truck
i have a black 2005 FX4 supercrew and i really like the Harley davidson headlights i was wondering where you got them from and if they would work for my truck
Thread Starter
|
Member
Joined: Aug 2005
Posts: 95
Likes: 1
From: Ohio
Originally Posted by rltripp
I have to say....AWESOME mod!!! I've been wanting to do this for a while, but I am not a mechanic by any means, so I decided to wait and let someone else try to see if it was even possible. It was well worth the wait. Could you give me an estimate on the total cost? and maybe a good wright up that us non-mechanics can follow?
Last edited by FX4andHARLEY; Nov 2, 2005 at 10:33 PM.
Thread Starter
|
Member
Joined: Aug 2005
Posts: 95
Likes: 1
From: Ohio
Originally Posted by Mart Man 03 L
Don't mean to hyjack the thread, but I can't email you. The big twin in the photo looks like a Deuce. What exhaust system are you using? That set-up looks sick. When I bought my Harley, in January, I had a hard time deciding between the Duece and the Wide Glide. I think that exhuast system would look right at home on my ride. Oh yeah, great job on the console!!
Senior Member
Joined: May 2005
Posts: 208
Likes: 0
From: LA- Lower Alabama
Originally Posted by FX4andHARLEY
I’m working on the update to my gallery with descriptions on the console install. I’ve got a lot of pictures but don’t have pictures of every detail. This may take a few days, I’ve got a real day job and my own business on the side that I’m working on. But I’ll have it ready by the end of the week.
Thread Starter
|
Member
Joined: Aug 2005
Posts: 95
Likes: 1
From: Ohio
I've finally added the details of the Flow Through conversion to my gallery. Check it out. I hope this answers more questions then it creates.
The parts that went into this setup are listed below:
Console #1 w/shifter---eBay---$247.50---A Bidding War
Console #2 w/o shift---eBay---$45.00
Top Finish Panel---Ford Parts Online---$32.42---4L3Z-15045A76-AAA
Column shroud Assem.---Ford Parts Online---$20.60---don't have a number
Front Bracket---Ford Parts Online---$20.68---4L3Z-15045B32-AA
Rear Bracket---Ford Parts Online---$14.64---4L3Z-15045B34-AA
Floor Shifter Cable---Ford Dealer---$32.00---5L3Z-7E395-BA
The parts that went into this setup are listed below:
Console #1 w/shifter---eBay---$247.50---A Bidding War
Console #2 w/o shift---eBay---$45.00
Top Finish Panel---Ford Parts Online---$32.42---4L3Z-15045A76-AAA
Column shroud Assem.---Ford Parts Online---$20.60---don't have a number
Front Bracket---Ford Parts Online---$20.68---4L3Z-15045B32-AA
Rear Bracket---Ford Parts Online---$14.64---4L3Z-15045B34-AA
Floor Shifter Cable---Ford Dealer---$32.00---5L3Z-7E395-BA
Last edited by FX4andHARLEY; Nov 27, 2005 at 01:44 AM.
Senior Member
Joined: May 2005
Posts: 348
Likes: 0
From: Michigan
Excellent walkthrough...looks like something one could do over a weekend and at least get the mechanical parts done. The finishing touches look like they could be a pain but you did an awesome job. I would have thought your truck came from the factory like that if you didn't say so.
Thread Starter
|
Member
Joined: Aug 2005
Posts: 95
Likes: 1
From: Ohio
Originally Posted by shookman34
Excellent walkthrough...looks like something one could do over a weekend and at least get the mechanical parts done. The finishing touches look like they could be a pain but you did an awesome job. I would have thought your truck came from the factory like that if you didn't say so.
The site cut off some of the longer descriptions with the photos, so I added sheets with the complete descriptions.
Member
Joined: Oct 2005
Posts: 51
Likes: 0
From: central florida
super job!
just ordered my second one from ebay to take the knife too! i will add the shifter sometime later too.
Like many others i am sure, i am going to recreate your project - any chance your interested in making a few bucks and selling templates?! if so, i would be interested!
Thanks
Ben
just ordered my second one from ebay to take the knife too! i will add the shifter sometime later too.
Like many others i am sure, i am going to recreate your project - any chance your interested in making a few bucks and selling templates?! if so, i would be interested!
Thanks
Ben
Senior Member
Joined: Feb 2005
Posts: 579
Likes: 0
From: INDY BABY!
I, as many have already said, also wanted to say great work on your console conversion. The sole reason I bought the truck was because of the console. I think it looks really great in the regular cab. 