5.4 performance mods?

Thread Tools
 
Search this Thread
 
Old Apr 26, 2004 | 03:36 PM
  #46  
JMC's Avatar
JMC
Technical Article Contributor
25 Year Member
Joined: Dec 1997
Posts: 9,417
Likes: 11
From: Windsor,Ontario,Canada
Originally posted by 4.6lpwnage
check ebay for under drive pulleys, Air intakes, and throttle body spacer. i got all those mods for my truck off ebay $55 for intake $77 for spacer and set of aluminum under drive pulleys for 24 bucks. all brand new. added about 55HP and 60lb torque that'd be best bang for buck. so check ebay for some stuff. i have the 4.6L SOHC in my truck and i get 23mpg highway with my mods. only thing is with the under drive pulleys dont let ur truck idle more then like 5 minutes because it under drives the alternator and at idle it alternator cannot charge your battery well enough with the RPM reduction on it.
This was your first post in the thread. No it was not a question. It was Bull Shït. I don't care about your age or anything else about you except for the fact that you are a liar. I have never made reference to your age or intellegence except to suggest that you stop breathing the NOS. I applaud the fact that you are trying to help others but if the above quote is an example of the kind of help you have to offer then I suggest you stop helping.


JMC
 
Reply
Old Apr 26, 2004 | 04:00 PM
  #47  
IzzyEddy's Avatar
Senior Member
Joined: Nov 1998
Posts: 729
Likes: 0
From: Windsor, ON, Canada
Originally posted by Neal
As for where I get my parts from....... Give MIKE TROYER a call at PERFORMANCE PRODUCTS. 1 540 862-9515. Tell him I sent you. He will also set you straight on *ACTUAL* H.P gains with mods for our trucks.
The website is: Troyer Performance

That my friend is probably one of the best answers that you will EVER get on this site. You want more HP & TQ for your truck then that is the place and man you need to talk to.

Look, the facts are that the 1997 4.6L motor delivered 220 HP at the flywheel. Not at the rear wheels. Yes, the current Ford sites all state 231 HP because we are in the year 2004 and that is what the motors are now putting out because of changes to them. The fact still remains that you have no visible proof that you have or have not gained that much HP & TQ on your truck. I can not speak for SSCULLY but the other three of us (Neal, JMC & I) have been to the dragstrip and to the chassis dyno and have proof of what we make with our trucks. And from all of the experience that is collected on this site, there is no way that you have created that much HP & TQ from those few mods. Bottom line, you beat me on the street when I am at dragstrip trim then you are going faster than 17.2 seconds in the quarter mile. You beat Neal which I doubt will ever happen, you will be going less than 14.5 seconds in the quarter mile. Get to the dragstrip, pay the money and get time slips or go to a dyno and get the rear wheel HP & TQ plots and post. It is not that hard since you seem to be at the track all the time anyhow, spend an extra $10 and prove yourself. That is all we are saying, it is not hard to understand. We have seen some wierd stuff before and providing the proof is in the pudding, we may still believe.

Have Fun & Keep on Truckin'
Dean
 
Reply
Old Apr 26, 2004 | 04:07 PM
  #48  
4.6lpwnage's Avatar
Banned For Personal Attacks & Inappropriate Language
Joined: Apr 2004
Posts: 113
Likes: 0
From: Temple,Tx
only been to the tracks once most of my racing is done against friends cars on streets near outskirts of town where police dont patrol. but if it will make up happy i'll go this friday to run what ya brung night and get a time slip for you. i was doing some online checking from various sites to find out stock what my truck runs and a 16.8 1/4 mile with the 3.55 rear end is what i saw from 3 sources. and the celica GT runs a 16.02 and the sunfire GT i beat ran a 15.5 at the track he showed me the time slip before he had his intake installed so i'm not sure what my truck runs but it is around a 15 if that makes u happy
 
Reply
Old Apr 26, 2004 | 04:16 PM
  #49  
BROTHERDAVE's Avatar
Senior Member
25 Year Member
Joined: Aug 2000
Posts: 1,759
Likes: 4
From: Friendswood Texas
first guy asked for performance mods on a budget.

check this out.
http://cgi.ebay.com/ebaymotors/ws/eB...category=38634

he is off on the hp gains but he has a good point about ebay.
 
Reply
Old Apr 26, 2004 | 04:24 PM
  #50  
4.6lpwnage's Avatar
Banned For Personal Attacks & Inappropriate Language
Joined: Apr 2004
Posts: 113
Likes: 0
From: Temple,Tx
what kinda computer u got dave i bet mines better =P, check out my website. i spend more money on my computer then my truck, $225 on the painjob alone cause of the color change additive, i had it done in a car body shop.
 
Reply
Old Apr 26, 2004 | 04:45 PM
  #51  
01screw's Avatar
Senior Member
Joined: May 2002
Posts: 538
Likes: 0
From: Chino Hills, Ca
Oh Yeah, I had Cobra emblems put on my truck and gained 20RWHP!!! I had it dynoed before and after the emblem mod but didn't get the printouts. I had my uncle who's been a mechanic for a 99 1/2 years put the emblems on for me, he knew exactly how to mount them so that I would gain the most H.P., but I watched real carefully so now I know how to do it myself next time!!!!
 
Reply
Old Apr 26, 2004 | 04:53 PM
  #52  
openclasspro's Avatar
Senior Member
Joined: Jul 2003
Posts: 262
Likes: 0
From: irwin,pa
your truck

what is the configuration on your truck- -my mods are below- i went from a 16.7 with a diablo chip-1/4 tank of gas to a 16.3 with a superchips 9100 tuner- 80 degrees, full tank of gas- supercab 4x4 3.55 5.4
i went against a quad cab hemi- 3.92 gears - he had intake and exhaust 16.3 he ran and you beat one? right!
 
Reply
Old Apr 26, 2004 | 05:12 PM
  #53  
frostby's Avatar
Senior Member
Joined: Feb 2004
Posts: 659
Likes: 0
From: Wisconsin
01Screw...

You said it!!!!! Its about time!!!!!

What ever happened to the poor guy looking for cheap mods? I don't think he's gonna come back here for advice if we keep this up! -Although I find it as entertaining as my wife's soaps!
 
Reply
Old Apr 26, 2004 | 05:20 PM
  #54  
01screw's Avatar
Senior Member
Joined: May 2002
Posts: 538
Likes: 0
From: Chino Hills, Ca
openclasspro,
I beat a Hemi truck, He had the Hemi emblems on his fenders but they were no match for my Cobra emblems!!! Oh by the way, I do have a few more mods I didn't mention.
 
Reply
Old Apr 26, 2004 | 06:20 PM
  #55  
JMC's Avatar
JMC
Technical Article Contributor
25 Year Member
Joined: Dec 1997
Posts: 9,417
Likes: 11
From: Windsor,Ontario,Canada
Re: 5.4 performance mods?

Originally posted by 800mc
Hey everyone. I'm here for a friend of mine looking for the best budget mods to do on his 97 5.4 F-150. Just would like to hear what kinds of things people feel have offered good bang for the buck. Thanks in advance for any help or suggestions!
800mc,

Sorry about hijacking your post. Your question was answered a while back when Neal answered Mike Troyer. A word of warning about cheap pullies. If you remove the balancer and replace it with a solid pulley it will not act as a harmonic balancer and could allow your crank to destroy itself. Get a brand name that is manufactured with a a balancer as part of it or one that bolts over the existing balancer. Summit has good prices as well as Jegs. Personally I stay from e-bay.

Regards

Jean Marc Chartier
 
Reply
Old Apr 26, 2004 | 06:42 PM
  #56  
Neal's Avatar
Senior Member
Joined: Jan 1999
Posts: 7,030
Likes: 3
From: WINDSOR, ONTARIO, CANADA
HI!... JMC, IZZY EDDY, SCULLY : I know I've been dragracing longer than this kid has been alive and I have *NEVER* heard of a dragstrip that charges you for a time slip run. Have you guys? Only in AMERICA I guess. Was the name of the track called "YOU GOT RIPPED OFF RACEWAY" ?

We were discussing this thread over at the local hangout the other night. Even all the ricer kids were calling B.S on the 55RWH.P gain with his very limited and some useless mods (TB SPACER). When he grows up and gets more experience and looks back at this time, he will pull foot out of mouth.
 
Reply
Old Apr 26, 2004 | 06:59 PM
  #57  
SSCULLY's Avatar
Technical Article Contributor
Joined: Jun 2002
Posts: 10,511
Likes: 10
From: Under the flightpath of old ORD 22R
Originally posted by Neal
HI!... JMC, IZZY EDDY, SCULLY : I know I've been dragracing longer than this kid has been alive and I have *NEVER* heard of a dragstrip that charges you for a time slip run. Have you guys? Only in AMERICA I guess. Was the name of the track called "YOU GOT RIPPED OFF RACEWAY" ?
Got me, I've never seen that either, but I don't live near that state, so I can't say for sure. All I have been to include the slip with the run. Maybe Chicago is far enough North that they don't do tht cheap crap runs. Then again, $10.00 for all night is kind of cheap....( I think that was what the post was, now I just see : This person is on your Ignore List. )

sms
 
Reply
Old Apr 26, 2004 | 07:01 PM
  #58  
01screw's Avatar
Senior Member
Joined: May 2002
Posts: 538
Likes: 0
From: Chino Hills, Ca
Originally posted by 4.6lpwnage
only been to the tracks once most of my racing is done against friends cars on streets near outskirts of town where police dont patrol.
Neal,
He's waiting for the police to give him a time slip.
 
Reply
Old Apr 26, 2004 | 07:18 PM
  #59  
4.6lpwnage's Avatar
Banned For Personal Attacks & Inappropriate Language
Joined: Apr 2004
Posts: 113
Likes: 0
From: Temple,Tx
u know it lol i havent had a traffic violation yet been pulled over twice once for driving with just a permit but long story on that it was my bro who got bitched at. then a 2nd time cop was harrassing me then when he was done he told me well the reason i pulled you over cause ur license plate light was out. but other then that havent had any traffic violations. =P lol raced with some state troopers though. those damn trucks they got are bad ***. but i knew the guy and he wanted to see if he could beat my truck with the ones they have.
 
Reply
Old Apr 26, 2004 | 09:57 PM
  #60  
openclasspro's Avatar
Senior Member
Joined: Jul 2003
Posts: 262
Likes: 0
From: irwin,pa
funny

Originally posted by 01screw
openclasspro,
I beat a Hemi truck, He had the Hemi emblems on his fenders but they were no match for my Cobra emblems!!! Oh by the way, I do have a few more mods I didn't mention.
01 screw- thats funny -a few mods i didn't mention- i was callin the bluff on th 4.6 liter kis beating a hemi with a 4.6- never did give his configuration-gears body style or 2or 4wd
 
Reply



All times are GMT -4. The time now is 10:24 AM.