5.4 performance mods?
My personal favorite :
https://www.f150online.com/forums/sh...75#post1298975
At least it went from the low 300's to the high 200's. He is getting closer to actual 
JMC, Why pick on that long ago, I think it has been more then once, and not that long ago for the last time...maybe 3 weeks.
https://www.f150online.com/forums/sh...75#post1298975
Originally posted by 4.6lpwnage
yeh flowmaster is usually the loudest.. but the new 2004 have the quiet steel so u cant hear anything but if u live in texas u dont have so many emision standards so u dont need mufflers cause in texas the Cat is a muffler so u dont need a muffle on your car just run pipes straight out of the Cats:-p trust me its loud. my dad was mechanic for ford for 19 years.i'm not much for noise louder my truck is the more cops it attracts. also i prefer to be able to sneak up. with 320HP.
yeh flowmaster is usually the loudest.. but the new 2004 have the quiet steel so u cant hear anything but if u live in texas u dont have so many emision standards so u dont need mufflers cause in texas the Cat is a muffler so u dont need a muffle on your car just run pipes straight out of the Cats:-p trust me its loud. my dad was mechanic for ford for 19 years.i'm not much for noise louder my truck is the more cops it attracts. also i prefer to be able to sneak up. with 320HP.

JMC, Why pick on that long ago, I think it has been more then once, and not that long ago for the last time...maybe 3 weeks.
Originally posted by JMC
My son the computer Geek read all that computer stuff you guys were yacking about. He is still Rolling On the Floor Laughing his Àss Off.
My son the computer Geek read all that computer stuff you guys were yacking about. He is still Rolling On the Floor Laughing his Àss Off.
The other one when I was being serious....that was kind of late, after 7 drinks at dinner. I very well could have gotten much of it wrong in the state that I was in
It looked good at the time, but with Mr 4.6L thinking that I cut and paste it from the internet, I might want to check it if he thinks it is correct, it must be dead wrong 
sms
Last edited by SSCULLY; Apr 30, 2004 at 02:06 PM.
Steve,
No he was laughing at 4.6L. What you typed made him laugh at 4.6L So 4.6L is a master mechanic, has a major in computers and math. I feel sorry for the people he goes to work for......
JMC
No he was laughing at 4.6L. What you typed made him laugh at 4.6L So 4.6L is a master mechanic, has a major in computers and math. I feel sorry for the people he goes to work for......
JMC
Originally posted by JMC
Steve,
No he was laughing at 4.6L. What you typed made him laugh at 4.6L So 4.6L is a master mechanic, has a major in computers and math. I feel sorry for the people he goes to work for......
JMC
Steve,
No he was laughing at 4.6L. What you typed made him laugh at 4.6L So 4.6L is a master mechanic, has a major in computers and math. I feel sorry for the people he goes to work for......
JMC
well..since the topic in general discussion isn't catching on as much as i'd thought it would...
My personal belief is that he is 16/17, has a small network of friends in which he may be the physically strongest and as such his friends look up to him, possibly in ways that he has yet to earn. Because of this he compensates by saying he owns his DAD's Truck which his dad may hot-rod around town with his son (4.6L) in the passenger seat. After doing this the son may take that story and embellish it more than just a lil bit. The reason why he does this is because in his network of friends they believe and trust him that he is telling the truth and do not question him.
HOWEVER, He has yet to learn that Ford know-how is NOT hereditary...
My personal belief is that he is 16/17, has a small network of friends in which he may be the physically strongest and as such his friends look up to him, possibly in ways that he has yet to earn. Because of this he compensates by saying he owns his DAD's Truck which his dad may hot-rod around town with his son (4.6L) in the passenger seat. After doing this the son may take that story and embellish it more than just a lil bit. The reason why he does this is because in his network of friends they believe and trust him that he is telling the truth and do not question him.
HOWEVER, He has yet to learn that Ford know-how is NOT hereditary...
Thanks alot guys I finally had access to someone who not only knows everything about Fords and has the inside secret squirl connections that no one else can get. He also knows everything about math and is obviously the guru of IT adminstrators. All you guys have done is weaken this chat board by getting him kicked out of here. Luckily for me since he is such a computer expert I bet he will find a way to get himself unbanned and take over.
I think I found a list of some of the secret mods that he is using to reach upwards of 320hp on his 4.6. Neal shame on you for not adding these to your truck. (LOL)
1. You should completely seal up the Knuter Valve
2. High speed muffler bearings
3. Lightweight directional fluid (weight saver)
4. low profile wax (cuts down on wind resistence=faster times)
I am sure there are some I am missing, as I dont have access like he does.
I think I found a list of some of the secret mods that he is using to reach upwards of 320hp on his 4.6. Neal shame on you for not adding these to your truck. (LOL)
1. You should completely seal up the Knuter Valve
2. High speed muffler bearings
3. Lightweight directional fluid (weight saver)
4. low profile wax (cuts down on wind resistence=faster times)
I am sure there are some I am missing, as I dont have access like he does.
HI!... Ya you forgot about his :
- synthetic blinker fluid
- Helium instead of air in his tires (makes truck lighter)
- Stacked TB SPACERS (good for 30H.P and 20MPG)
- He poured in 4 cans of compression (diet of coarse)
- Carbon fiber rods and crank
- and his air intake tubing is made of "QUIET STEEL" tubing.
- synthetic blinker fluid
- Helium instead of air in his tires (makes truck lighter)
- Stacked TB SPACERS (good for 30H.P and 20MPG)
- He poured in 4 cans of compression (diet of coarse)
- Carbon fiber rods and crank
- and his air intake tubing is made of "QUIET STEEL" tubing.
COME ON, you know you miss the little b@stard.
i personally think he was just seeing how many people he could pi$$ off. got to admit he was pretty good at it.
hmmm.... sounds familiar
have you looked at his home page?
nascarjoe, you been taking some phycology classes?
i personally think he was just seeing how many people he could pi$$ off. got to admit he was pretty good at it.
The reason why he does this is because in his network of friends they believe and trust him that he is telling the truth and do not question him.
has a small network of friends in which he may be the physically strongest and as such his friends look up to him, possibly in ways that he has yet to earn.
nascarjoe, you been taking some phycology classes?
neal
would have loved to race this kid neal- i wentt from a 16.721 wiith diablo chip 56 degrees 1/4 tank of gas to a 16.312 full tank of gas 80 degrees with 9100 by mike- i don't know what my truck would have weighed in with tank of gas and my 190 lbs ***- but sure it's making some power- .3 5.4 supercab 4x4 3.55



