Prototype Hurst short-throw for 97-03 F150 w/ M50D 3915026
#3
Right now, this is the only pic I have in my gallery. :o
https://www.f150online.com/galleries...213-133048.jpg
It shows where I eliminated the piece of rubber between the two mating surfaces to get rid of ALL slop, and I added lock washers and jam nuts to the back side so it would NEVER come loose again. This was my only complaint with the Hurst unit.
Here's a pic courtesy of JMC:
https://www.f150online.com/galleries...442-109439.jpg
If you want actual pics, I can get those tonight if interested.
https://www.f150online.com/galleries...213-133048.jpg
It shows where I eliminated the piece of rubber between the two mating surfaces to get rid of ALL slop, and I added lock washers and jam nuts to the back side so it would NEVER come loose again. This was my only complaint with the Hurst unit.
Here's a pic courtesy of JMC:
https://www.f150online.com/galleries...442-109439.jpg
If you want actual pics, I can get those tonight if interested.
#5
Literally takes about 30 min. Just 4 screws to remove the plastic cover, then 4 bolts to remove the lower plastics, then another 4 bolts to remove the actual assembly. Same for install with the exception of adjusting the 2nd. and 3rd. gear stops, then securing the shift lever as pictured above, but I'd try to remove and ship without having to loosen it up.
#7
Trending Topics
#10
#13
Summit doesn't list them, Hurst most certainly doesn't have any, not even service parts. Jegs shows them for $290, but I'd call them before I trusted that. They have been discontinued at least as long as B&M has owned the Hurst name. The boot is the same as the one pictured only new in wrap. I bought some extra hardware and the boot from Mr. Gasket thinking I would need new ones after Crash! was done taking it out of this project truck.