I replaced my blend door and heater core. Happy ending!
Thread Starter
|
Member
Joined: Oct 2005
Posts: 58
Likes: 0
Originally Posted by 200k97f150
Please help......this time I dont want to pay the knuckle head that broke parts of my dash to do it again......also any tips on "other stuff" to do while i'm in there would be awesome!
dukefamily@mchsi.com
dukefamily@mchsi.com
you've got mail!
Alan
Thread Starter
|
Member
Joined: Oct 2005
Posts: 58
Likes: 0
Originally Posted by skydrol55
Junior Member
Joined: Jan 2006
Posts: 6
Likes: 0
From: Cincinnati, Ohio
Junior Member
Joined: Feb 2006
Posts: 1
Likes: 0
From: Golden, Oklahoma
AlanT I would appreciate it a lot if I you could send me some blend door repair instructions. Still got a few cold days left in Golden, Oklahoma.
arthurb1042@hotmail.com
arthurb1042@hotmail.com
Thread Starter
|
Member
Joined: Oct 2005
Posts: 58
Likes: 0
Originally Posted by ArthurB
AlanT I would appreciate it a lot if I you could send me some blend door repair instructions. Still got a few cold days left in Golden, Oklahoma.
arthurb1042@hotmail.com
arthurb1042@hotmail.com
They're headed your way...Alan
Junior Member
Joined: Jan 2006
Posts: 6
Likes: 0
From: Cincinnati, Ohio
Hey AlanT can I get a copy of those instructions as well...By accident I posted the wrong email address before. Thanks!
ex805ex@gmail.com
ex805ex@gmail.com
Junior Member
Joined: Feb 2006
Posts: 4
Likes: 0
From: charleston, sc
Just wanted to thank you Alan T for the instructions to replace the Blend Door and Heater Core. I tackled it yesterday started At 8:00 and finished by 4:00. I did all the work myself except for my daughter holding the heater core inplace while I connected the hoses from the engine compartment. I read you instructions a couple of times through out the week and gathered the parts I needed I'm a one vehicle household so I was walking to gets parts if I missed something
luckily that didn't happen. Baggin was a giant help and highly recommended, I used white lables on all electrical connections. It took longer to take it apart then it did to put back together. I cut the heater pipes after attempting to separate them in the engine compartment. I had one screw left over that broke off while the dash was out but it's not visible and there are no squeks or sounds out of the dash board. I had to turn my heat down today because it was to hot boy thats nice for once.
Thanks Steve
Charleston SC
luckily that didn't happen. Baggin was a giant help and highly recommended, I used white lables on all electrical connections. It took longer to take it apart then it did to put back together. I cut the heater pipes after attempting to separate them in the engine compartment. I had one screw left over that broke off while the dash was out but it's not visible and there are no squeks or sounds out of the dash board. I had to turn my heat down today because it was to hot boy thats nice for once. Thanks Steve
Charleston SC
Member
Joined: Feb 2004
Posts: 36
Likes: 0
From: DFW
Member
Joined: Sep 2002
Posts: 95
Likes: 0
Junior Member
Joined: Jan 2006
Posts: 6
Likes: 0
From: Cincinnati, Ohio
Can anyone email me the instructions, I would really appreciate it...I am going to have to change mine out ASAP. Thanks in advance.
ex805ex@gmail.com
ex805ex@gmail.com
Junior Member
Joined: Mar 2006
Posts: 1
Likes: 0
Junior Member
Joined: Mar 2006
Posts: 1
Likes: 0
Alan,
Can I get those directions as well? Looks like you are a popular guy with them. It would be greatly appreciated. Sent to my yahoo account: kevinb123@yahoo.com.
Many thanks,
Kevin
Can I get those directions as well? Looks like you are a popular guy with them. It would be greatly appreciated. Sent to my yahoo account: kevinb123@yahoo.com.
Many thanks,
Kevin