F150online Forums

Let's start over......

Thread Tools
 
Search this Thread
 
Old Nov 10, 2011 | 06:03 PM
Share
  #69571  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by Bluejay
I have no idea. they were already filleted. They catch some big ones, so I have been told. It some guys that do this for fun and use the fish they catch to feed groups.. All we had to provide was the utenils and drinks. We donated $500 to thier church.
For only 500 that was pretty inexpensive....
 
Reply
0
Old Nov 10, 2011 | 06:33 PM
Share
  #69572  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 85
From: Burleson/Athens/Brownsboro, TX
Originally Posted by 88racing
For only 500 that was pretty inexpensive....
Yep, and better than I have eaten in any restaurant. Lots of it too. Covered the plate.
 
__________________
Jim
Reply
0
Old Nov 10, 2011 | 08:10 PM
Share
  #69573  
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Originally Posted by Bluejay
Over! The catfish, hush puppies and fries were fantastic. They cook in 55 gal drums of oil. An interesting setup.
Oh yea, real tasty that way. The VFW fry's them up the same, every third Friday of the month lol.. Also, Smelt is pretty tasty that way. We use to make our own smelt dippers and catch them right from the channel (Lake Michigan). Fresh Fish/Smelt Fry's are always the best. Great with your favorite ale.

Although, I've never been to one w/500 people.

That's a party!

 
Reply
0
Old Nov 10, 2011 | 08:46 PM
Share
  #69574  
dsq3973's Avatar
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Finished wiring up the big air compressor tonignt and fired it up now I am doing a leak down test on it to see if I need to tighten any fitting tomorrow. I also rebuilt the throttle linkage for the carb on the John Deere tonight.
 
Last edited by dsq3973; Nov 10, 2011 at 08:57 PM.
Reply
0
Old Nov 10, 2011 | 08:50 PM
Share
  #69575  
MTM Ford's Avatar
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Got the valve cover gaskets on the tractor last night. Taking it to my buddies garage tomorrow to start tearing it down.
 
Reply
0
Old Nov 10, 2011 | 08:59 PM
Share
  #69576  
dsq3973's Avatar
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Originally Posted by MTM Ford
Got the valve cover gaskets on the tractor last night. Taking it to my buddies garage tomorrow to start tearing it down.
Have fun, I get to take the carb off again and go through it to find out why mine is now over fueling it's self now that I put a new fuel pump on it. I think it may have a pin hole leak in the float or there is dirt plugging one of the needle valves.
 
Last edited by dsq3973; Nov 10, 2011 at 09:03 PM.
Reply
0
Old Nov 10, 2011 | 09:53 PM
Share
  #69577  
MTM Ford's Avatar
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Originally Posted by dsq3973
Have fun, I get to take the carb off again and go through it to find out why mine is now over fueling it's self now that I put a new fuel pump on it. I think it may have a pin hole leak in the float or there is dirt plugging one of the needle valves.
Have fun with that, might be easier to convert to FI
 
Reply
0
Old Nov 11, 2011 | 06:30 AM
Share
  #69578  
dsq3973's Avatar
Senior Member
Joined: Nov 2007
Posts: 1,845
Likes: 0
From: In a house, in a small town
Morning.
 
Reply
0
Old Nov 11, 2011 | 06:50 AM
Share
  #69579  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
 
Reply
0
Old Nov 11, 2011 | 07:42 AM
Share
  #69580  
Patman's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Aug 2005
Posts: 21,337
Likes: 159
From: DFW
im up, just not awake yet
 
Reply
0
Old Nov 11, 2011 | 07:53 AM
Share
  #69581  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
 
Reply
0
Old Nov 11, 2011 | 08:33 AM
Share
  #69582  
Bluejay's Avatar
Global Moderator &
Senior Member
20 Year Member
Joined: Mar 2005
Posts: 26,080
Likes: 85
From: Burleson/Athens/Brownsboro, TX


Edit:I think I'm asleep. How did the laughing smiley get there in place of the waving smiley?
 
__________________
Jim
Last edited by Bluejay; Nov 11, 2011 at 08:38 AM.
Reply
0
Old Nov 11, 2011 | 08:41 AM
Share
  #69583  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by Bluejay


Edit:I think I'm asleep. How did the laughing smiley get there in place of the waving smiley?
idk?
 
Reply
0
Old Nov 11, 2011 | 08:49 AM
Share
  #69584  
Toyz's Avatar
Senior Member
Joined: Jul 2007
Posts: 3,291
Likes: 0
From: Beaverton Or.
Pretty sure it dropped into the 30's last night. Bringing the coffee pot to work today
 
Reply
0
Old Nov 11, 2011 | 08:54 AM
Share
  #69585  
shifty219's Avatar
Senior Member
Joined: Dec 2008
Posts: 508
Likes: 0
From: Sault,ontario,CaNaDa
Morning boys, woke up to a nice blanket of snow on the ground
 
Reply
0



Advanced Search

All times are GMT -4. The time now is 09:02 AM.