F150online Forums

Let's start over......

Thread Tools
 
Search this Thread
 
Old Jun 23, 2011 | 05:15 PM
Share
  #62071  
MTM Ford's Avatar
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Just got back from the Ford dealership. Went to see if I could just get the clips that hold the flares onto the fender. You can't, have to buy the whole flare which is $80 a piece for the front's. Didn't even bother to ask about the rears.
 
Reply
0
Old Jun 23, 2011 | 05:16 PM
Share
  #62072  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by Bluejay
When you fart in an airplane, the earth does not move.
The people do.....
 
Reply
0
Old Jun 23, 2011 | 05:37 PM
Share
  #62073  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
Well, looks like I have to get a new widsheild. Had a huge rock flew up from the truck in front of me and hit it. Its not that bad but those damn windsheid repair kits don't work to good. I just got this windshield about 7 months ago.
 
Last edited by 06F150STX; Jun 23, 2011 at 05:39 PM.
Reply
0
Old Jun 23, 2011 | 05:38 PM
Share
  #62074  
Stealth's Avatar
Thread Starter
|
Senior Member
Truck of the Month
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
That blows Randall. I've been driving around with a cracked windshield for a couple of years or so now.
 
Reply
0
Old Jun 23, 2011 | 05:48 PM
Share
  #62075  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by MTM Ford
Just got back from the Ford dealership. Went to see if I could just get the clips that hold the flares onto the fender. You can't, have to buy the whole flare which is $80 a piece for the front's. Didn't even bother to ask about the rears.
Have you tried tasca?
 
Reply
0
Old Jun 23, 2011 | 05:51 PM
Share
  #62076  
MTM Ford's Avatar
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Originally Posted by 88racing
Have you tried tasca?
I looked on their site but didn't find anything. I think it's hard navigating around their site to be honest.
 
Reply
0
Old Jun 23, 2011 | 06:03 PM
Share
  #62077  
06F150STX's Avatar
Senior Member
Joined: Nov 2007
Posts: 555
Likes: 0
From: Quitman,La.
Originally Posted by Stealth
That blows Randall. I've been driving around with a cracked windshield for a couple of years or so now.
Yeah. I have a small crack in mine but that big **** bullseye doesn't look good.
 
Last edited by 06F150STX; Jun 23, 2011 at 06:39 PM.
Reply
0
Old Jun 23, 2011 | 08:00 PM
Share
  #62078  
MTM Ford's Avatar
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Just clay barred and waxed the truck. I got the most junk off of the doors, I figured the hood would be the worst. It turned out really good, too bad it's gonna rain tonight.
 
Reply
0
Old Jun 23, 2011 | 08:46 PM
Share
  #62079  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,730
Likes: 42
From: Concord, NC
That sucks Randall...

Got my Third brake light Matt. I'll post a pick in a few
 
Reply
0
Old Jun 23, 2011 | 08:58 PM
Share
  #62080  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,730
Likes: 42
From: Concord, NC
http://www.flickr.com/photos/62648936@N05/5864667089/http://www.flickr.com/photos/62648936@N05/5864667089/ by http://www.flickr.com/people/62648936@N05/, on Flickr
 
Reply
0
Old Jun 23, 2011 | 09:00 PM
Share
  #62081  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Originally Posted by MTM Ford
I looked on their site but didn't find anything. I think it's hard navigating around their site to be honest.
Thats why I usually call them.....
 
Reply
0
Old Jun 23, 2011 | 09:01 PM
Share
  #62082  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,730
Likes: 42
From: Concord, NC
Been thinking of getting a Kenwood Double Din... by the time I buy the cleansweep and extra wiring for it, I'm over the 349 price of a nice Kenwood...
 
Reply
0
Old Jun 23, 2011 | 09:03 PM
Share
  #62083  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,730
Likes: 42
From: Concord, NC
I realized I need 5 preamp outputs... this one looks like a winner to me.

JVC
 
Reply
0
Old Jun 23, 2011 | 09:06 PM
Share
  #62084  
88racing's Avatar
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Myself I kind of like the factory one...
 
Reply
0
Old Jun 23, 2011 | 09:18 PM
Share
  #62085  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,730
Likes: 42
From: Concord, NC
Bastard I think I'm just going to go this route... should be less of a headache. The JVC one looks like an awesome HU. My huge thing with it is that the faceplate detaches... that is such an amazing feature. That's why I was going to do the shaker - didn't want theft. Looks like I'll hold onto the shaker but do this instead. So 449 for the HU, 99 for the box, 119 for the sub and then the amp and sub install kits. I'm still amazed at how much better these Excelon speakers sound off the crappy factory HU. Such a big difference. I think I'm going to pee myself when I get this system done
 
Reply
0



Advanced Search

All times are GMT -4. The time now is 11:44 PM.