Tell us your setup! Intake and Exhaust!
#1
Tell us your setup! Intake and Exhaust!
Well, seeing how there are so many people coming in with questions on what they should do, i figured I should start a thread and have everyone state their setups! Everything from the old school pushrod motors to todays EcoBoost's! Ill start it with my lame excuse.
1990 EFI 351 Windsor
Stock intake with K&N Drop in.
Flowtech longtubes.
Catless!
24" Cherrybomb flow through glasspacks
3 inch mandrel bent stainless true duals 45º out the back.
1990 EFI 351 Windsor
Stock intake with K&N Drop in.
Flowtech longtubes.
Catless!
24" Cherrybomb flow through glasspacks
3 inch mandrel bent stainless true duals 45º out the back.
Last edited by 1997 lariat 4.6; 02-07-2014 at 11:58 AM.
#2
2007 5.4L 3v.
Stock intake unmodified, Amsoil Ea filter.
Stock manifolds
Stock catalytic converters
Magnaflow #10778 Y pipe
3" T-409 stainless intermediate pipe
Magnaflow #14419 Magnapack muffler
2.5" mandrel bent t-409 tailpipes 45'd
Magnaflow #35117 4"x18" rolled edge tips
Currently have a leaking passenger side manifold gasket. This spring I plan to install OBX longtubes and run a temporary OR/Y ( off road Y-pipe ) and switch to a Borla XR1.
Stock intake unmodified, Amsoil Ea filter.
Stock manifolds
Stock catalytic converters
Magnaflow #10778 Y pipe
3" T-409 stainless intermediate pipe
Magnaflow #14419 Magnapack muffler
2.5" mandrel bent t-409 tailpipes 45'd
Magnaflow #35117 4"x18" rolled edge tips
Currently have a leaking passenger side manifold gasket. This spring I plan to install OBX longtubes and run a temporary OR/Y ( off road Y-pipe ) and switch to a Borla XR1.
#4
2002 F-150 4.6-Romeo
Stock Intake, Gotts Mod, K&N Air Filter (soon to be Amsoil EA).
Magnaflow 15"x8"x5"-2.5"SI/SO oval muffler in place of stock. 3.5"x9" Black Chrome Tip.
These were all within maybe a couple thousand miles after replacing the muffler. Now has about 15k miles on it and is louder, really need to make some better videos.
Stock Intake, Gotts Mod, K&N Air Filter (soon to be Amsoil EA).
Magnaflow 15"x8"x5"-2.5"SI/SO oval muffler in place of stock. 3.5"x9" Black Chrome Tip.
These were all within maybe a couple thousand miles after replacing the muffler. Now has about 15k miles on it and is louder, really need to make some better videos.
Last edited by Chris's FX4; 01-29-2013 at 08:15 PM.
#5
#6
#7
Trending Topics
#9
#10
2002 F150 4.6 Windsor
Muffler cut with pipe welded in with stock tail pipe still out the back
I was out of money and just wanted some sound and it actually sounds pretty dang good for $25 and I get compliments all the time haha.
This summer I will be getting the rear cats cut and an x-pipe put in with two Borla S-type mufflers out the back at 45's with either 4 or 5 inch tips
Muffler cut with pipe welded in with stock tail pipe still out the back
I was out of money and just wanted some sound and it actually sounds pretty dang good for $25 and I get compliments all the time haha.
This summer I will be getting the rear cats cut and an x-pipe put in with two Borla S-type mufflers out the back at 45's with either 4 or 5 inch tips
#14