Announcement from PHP
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
I was just in the "normal" DD mode, not in "race" or "utility" mode.
Senior Member
Joined: Dec 2007
Posts: 413
Likes: 0
From: Carlyle, IL
do they have specific mounting to our 97-03 trucks? And does the gauge do trans temperature because thats the main one i want
Senior Member
Joined: May 2009
Posts: 270
Likes: 0
From: I AM Canadian!
Senior Member
Join Date: Apr 2009
Location: Tea, SD
Vehicle: 2006 Ford F150
Posts: 145
Here's some more. Go to blendmount.com and you can mount the scangauge above your rearview mirror so its off your dash.
Thank Bill at PHP for that one!
Senior Member
Joined: Dec 2007
Posts: 413
Likes: 0
From: Carlyle, IL
thanks, hopefuly edge just gets the cable problem solved and soon
the scan guage + mount is around $220, alone. The X3, even though its not up on the site, going off the price of the SF3 (379.99) + 3 custom tunes (figure 30 each)
= $700 + shipping as a round about cost.
Compared the the Gryphon which is $399 plus the $30x3 for the custom tunes = $490.
I think i will just wait and hope instead of paying an extra $210 for an ugly gauge and a hand held tuner that i will most likely have to unplug the gauge and plug in the tuner each time I want to change the tune.
the scan guage + mount is around $220, alone. The X3, even though its not up on the site, going off the price of the SF3 (379.99) + 3 custom tunes (figure 30 each)
= $700 + shipping as a round about cost.
Compared the the Gryphon which is $399 plus the $30x3 for the custom tunes = $490.
I think i will just wait and hope instead of paying an extra $210 for an ugly gauge and a hand held tuner that i will most likely have to unplug the gauge and plug in the tuner each time I want to change the tune.
Senior Member
Joined: May 2009
Posts: 270
Likes: 0
From: I AM Canadian!
Yup!
If I were patient enough, I'd have gone with a Gryphon myself, but that would have had me waiting for quite some time....and would not be able to install my CAI. (Damn you brain!)
But I disagree with the ugly gauge comment however, I find having it compact is less intrusive and less prone to theft also.
Different strokes I guess!
If I were patient enough, I'd have gone with a Gryphon myself, but that would have had me waiting for quite some time....and would not be able to install my CAI. (Damn you brain!)
But I disagree with the ugly gauge comment however, I find having it compact is less intrusive and less prone to theft also.
Different strokes I guess!
Registered User
Joined: Mar 2008
Posts: 163
Likes: 0
From: Indiana
Edge has been having a problem with the OBDII cable for the 97-03 programmers. We've been replacing as many as we're selling. I think you'd probably be more upset if we sold you something that didn't work. If they can get this problem resolved, we'll be happy to add the 97-03 Gryphon to our product list again, but for now, it makes more sense from a customer service point of view NOT to sell them.
Senior Member
Joined: Apr 2007
Posts: 112
Likes: 0
From: Texas
I purchased my Evo back in 5/2007 and have always had the intermittent issue with the display cutting out. Sometimes it would go months without issues and other times I would have to replug the cable 2 or 3 times when driving. The display shutting off has always been a scary thought when it comes down to being in the process of changing up a tune or going back to stock.
Hopefully this issue will be resolved in the near future so I can take benefit of the Gryphon tunes.
Hopefully this issue will be resolved in the near future so I can take benefit of the Gryphon tunes.
Yup, Power Hungry Performance.
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
I purchased my Evo back in 5/2007 and have always had the intermittent issue with the display cutting out. Sometimes it would go months without issues and other times I would have to replug the cable 2 or 3 times when driving. The display shutting off has always been a scary thought when it comes down to being in the process of changing up a tune or going back to stock.
Hopefully this issue will be resolved in the near future so I can take benefit of the Gryphon tunes.
Hopefully this issue will be resolved in the near future so I can take benefit of the Gryphon tunes.
You aren't using electronics around it? Are you?
Like say you have your cell phone by it or any other frequency emitting devices?
Try hitting enter 2 times and the display should come back on.
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
thanks, hopefuly edge just gets the cable problem solved and soon
the scan guage + mount is around $220, alone. The X3, even though its not up on the site, going off the price of the SF3 (379.99) + 3 custom tunes (figure 30 each)
= $700 + shipping as a round about cost.
Compared the the Gryphon which is $399 plus the $30x3 for the custom tunes = $490.
I think i will just wait and hope instead of paying an extra $210 for an ugly gauge and a hand held tuner that i will most likely have to unplug the gauge and plug in the tuner each time I want to change the tune.
the scan guage + mount is around $220, alone. The X3, even though its not up on the site, going off the price of the SF3 (379.99) + 3 custom tunes (figure 30 each)
= $700 + shipping as a round about cost.
Compared the the Gryphon which is $399 plus the $30x3 for the custom tunes = $490.
I think i will just wait and hope instead of paying an extra $210 for an ugly gauge and a hand held tuner that i will most likely have to unplug the gauge and plug in the tuner each time I want to change the tune.
Never put any numbers to it like you did!
Just was offering it as an option?
