Baticus's 06 Supercrew build...
#361
#362
#364
I was just reading a thread that twinskrewed has with the painless controller. From what I can see it seems to be a pretty decent controller. Only issue he's really ran into was finding a location for the temp sender. So that's not too big of a deal I don't think.
Going to price that out!
Going to price that out!
#365
#366
Yeah I know what you mean. Never been a fan of the probe style senders. I will take a look under the hood tomorrow, hopefully see if I can figure anywhere else aside from the pipe with threaded inserts. I'd rather not cut the rad hose.
And the painless kit is 275 through summit. A bit pricey, but if it's as good as I've been reading, then I'll probably go that route.
And the painless kit is 275 through summit. A bit pricey, but if it's as good as I've been reading, then I'll probably go that route.
#368
#369
Ordered the fan controller. Painless 30142, was wanting the 30140, because of the 3/8 thread on the sensor. But the 30142 kit was 75.00 cheaper, and the only difference I could find was the sensor thread size(metric/standard). So either way if I need a standard pipe threaded sensor, I can source one through work for about 7.00.
Going to check the wreckers Monday for the fan set up, and if not I'll check the local Ford dealer. I've sourced the fans online for around 250(converted to Canadian with shipping). So we'll see. The wreckers around here usually charges a mint for stuff so I'm not going to hold my breath.
Going to check the wreckers Monday for the fan set up, and if not I'll check the local Ford dealer. I've sourced the fans online for around 250(converted to Canadian with shipping). So we'll see. The wreckers around here usually charges a mint for stuff so I'm not going to hold my breath.
#371
#372
Meangene, here are the pictures of the cam... Not the easiest to get a picture of the wear.
Also picked this up today...
According to the local Ford dealer it was supposed to have came with the controller. It never, but I'm going to have to source connectors for it now. Unless the painless controller has some that will work. I've also noticed that these fans are slightly different than others have posted. Now I'm waiting on the controller to get here, should be sometime this coming week.
Also ordered one more muffler, I was planning on using the one I had on my truck, along with one new. I unfortunately forgot that I had welded a mount bracket off the front to meet up with the factory mount. Rather than mess with it, I ordered another new muffler. Once it gets here I will be getting my exhaust fixed up for good.
Also picked this up today...
According to the local Ford dealer it was supposed to have came with the controller. It never, but I'm going to have to source connectors for it now. Unless the painless controller has some that will work. I've also noticed that these fans are slightly different than others have posted. Now I'm waiting on the controller to get here, should be sometime this coming week.
Also ordered one more muffler, I was planning on using the one I had on my truck, along with one new. I unfortunately forgot that I had welded a mount bracket off the front to meet up with the factory mount. Rather than mess with it, I ordered another new muffler. Once it gets here I will be getting my exhaust fixed up for good.
Last edited by baticus; 01-02-2015 at 04:29 PM.
#375