Man, if only those beers could travel through the internet, out my computer and into my mouth. I'm getting thirsty right about now.

 

alright i just ordered mine. i took a look at my dome lights and they all are 578s so i ordered 3 of these....
http://www.v-leds.com/Interior-LED/D...-p8200027.html
and thanks for the coupon code man. saved me 8 bucks
ill keep yall updated when they come in and if all of them fit..

 

Just put my order in and saved $16.39

V-LEDS HID WHITE 4 M-SMT 2W HIGH POWER BULBS 194 168 158
V-LEDS RED 4 M-SMT 2W HIGH POWER BULBS 194 168 158
2 V-LEDS 3 SMT RED WEDGE BASE DASH LIGHT BULBS 37 74

Now my domes will be all red and so will my gauge cluster

 

????? I want to do the gauge cluster LED's i know it's the 37 74 but do i need 1 pair or 2?
Edit: After reading around i found out i need 11 bulbs for the cluster. How many do i need for the lights under the ac controls etc.

 

Yea, the gauge cluster uses 11 bulbs. I bought a pair of the first 2 bulbs and 6 pairs for the dash. I believe the a/c controls, door panels, etc. are talked about within the first couple pages of this thread.

 

Does anyone have a picture, or can take a picture of where the electronic flasher goes? I'm having trouble locating it. I looked under the driver side dash, and didn't see it. Is it in plain sight, or does it take some work to get to?

 

There's a great post about that here.

 

Awesome! Thanks for the fast reply. I just got the flasher installed, everything is working great.

 

Okay. So I have a question. Yesterday when I was installing my new switchback turn signals, I also installed LED sidemarkers. I had the turn signal light unplugged, and the new sidemarker installed. I turned on my lights and the sidemarker worked. I turned on my hazards, and the sidemakers began function as a signal since the turn signal bulb was unplugged.
Is this a saftey feature incase a turn signal bulb goes out?
When I plugged the new LED switchback into its socket, the sidemarker began normal functions of staying on when the hazards were on.
I think the sidemarker would make a nice turn signal from factory in addition to the standard one located in the front of the head light. Just an idea.

 

No problem man. Glad I could help. I was just looking at the same thread. My switchbacks came in the mail today. Now I'm trying to kill time at work so I can get home and install them.

 

How do those switchbacks look with regular headlight bulbs in? I know if your running 6k HIDS they would look great but 6k switchbacks with regular bulbs, I would think, would look funny.

 

Yes, they look funny. I have Silverstars and my heads look extremely yellow with my 5k switchbacks. Retrofit projectors and HIDs are in the future though.
I use my switchbacks a lot as running lights so by themselves, they look great and are bright enough that some people think my lights are on.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

 

Got the switchbacks and the flasher installed last night. Looks great but now every time I hit the brakes, my flasher ticks once. Any ideas? This is pretty annoying. Btw, I got the Tridon ep27 flasher from Advance that everyone recommended. Thanks for the help guys.

 

^^^ Does it do it every time you hit the brakes? Mine only does it once in a while and usually while I'm on the highway when I have to slow down when using cruise control. When I first got the flasher and told people about it in another thread, finestylef150 I think it was, was having the same problem. I don't know what to tell you man.

 

If it ticks from the brakes, it wont do it for a few minutes, then I hit them again and it ticks again. Do you or finestylef150 have LED tails? Ive got the stock ones and I wonder if that has anything to do with it. I might swing by Advance and see if they know anything (probably not). I guess I can always call Tridon and see if they have any suggestions.