Here is what the bumper will pretty much look like. I put in some 4" rear lights too. I am still fabbing the swing away tire carrier and winch setup.

LP air and rear camera


110v outlet

 

Dude that looks awesome like the air and 110 outlets

 

Nice rear bumper dude, the air/outlets/review camera are amazing! Good job, cant wait to see the finished product

 

I picked up all the metal and supplies I need and also ordered another moto metal 909 wheel. I was going to buy another tire too but I"m going to upgrade soon to 38" at a minimum

 

the bumper looks sick man
you think i could take that stock rear bumper off your hands

what tires you gonna go too next?

 

ahh i wish you were building and selling these....boondock appears to have gone **** up and i'm in need of front and rear bumpers just like yours. Let me know if you wanna work something out....seriously!

 

You can have the rear bumper if you want it. The only thing is it's gonna be a little scratched up from being in the bed of the truck with all the metal for the swing away tire carrier. The bumper came with the tow package but I'm going to cut off the bracket for the rear brake light hookup so I can weld it to the new bumper.

 

I'm not sure as far as tires... at a minimum I want to find a 38x13.50R20 but I want a bigger lift and may eventually want to go up to the Mickey Thompson 40x13.50R20 Baja Claw. First things first, though. I'm gonna get all my welding projects I have on the list out of the way first.

 

sweet thanks man a few scratches are fine i can just get it repainted if need be are you gonna be a race legal this Friday if you are i can just get it from you
then

 

40s with a 12" Rize lift would look awesome

 

Looks great man. I knew it would.

 

I was thinkin about the RIZE 12" but I want a skid plate and there isn't really a way to mount one to the front bracketry of the RIZE lift. It would be more feasible with the bulletproof lift but I'm not sure I wanna go that high just yet.

 

swing away tire carrier in progress...

Here is the spindle that will make the carrier rotate. It will be inserted in the sleeve which will be welding into the bumper.

Here is the spindle assembled.


Here is the securing side that will be welded at the opposite end of the bumper.


Square tubing will run between the spindle and securing side, welded on each side to look something like this...

 

Looks great man! Can't wait to see pics of it

 

Swing away tire carrier clamped to bumper...