Guess the Dyno #'s on this Tuned F150
Thread Starter
|
Senior Member
Joined: Apr 2005
Posts: 3,009
Likes: 0
From: In a van down by the river
Guess the Dyno #'s on this Tuned F150
Hello All,
I'm going to the dyno today (mustang chassis dyno) in Anoka, MN [to give you an idea of weather conditions] at 4pm.
Let's see who can guess the results of peak RWHP and Flywheel HP and TRQ on the dyno.
Here are the truck specs:
Troyer XCal2 Tuning - 91 Oct perf tune
Magnaflow SIDO catback
Magnaflow 3 inch resonator in front of the catback
AF1 3.25"
2005 5.4 3V engine
3.73LS
4WD
Supercrew
Duke
I'm going to the dyno today (mustang chassis dyno) in Anoka, MN [to give you an idea of weather conditions] at 4pm.
Let's see who can guess the results of peak RWHP and Flywheel HP and TRQ on the dyno.
Here are the truck specs:
Troyer XCal2 Tuning - 91 Oct perf tune
Magnaflow SIDO catback
Magnaflow 3 inch resonator in front of the catback
AF1 3.25"
2005 5.4 3V engine
3.73LS
4WD
Supercrew
Duke
Last edited by F150 Duke; Nov 17, 2006 at 01:27 PM.
Member
Joined: Oct 2006
Posts: 29
Likes: 0
Originally Posted by F150 Duke
Hello All,
I'm going to the dyno today (mustang chassis dyno) in Anoka, MN [to give you an idea of weather conditions] at 4pm.
Let's see who can guess the results of peak RWHP and Flywheel HP and TRQ on the dyno.
Here are the truck specs:
Troyer XCal2 Tuning - 91 Oct perf tune
Magnaflow SIDO catback
Magnaflow 3 inch resonator in front of the catback
AF1 3.25"
2005 5.4 3V engine
3.73LS
4WD
Supercrew
Duke
I'm going to the dyno today (mustang chassis dyno) in Anoka, MN [to give you an idea of weather conditions] at 4pm.
Let's see who can guess the results of peak RWHP and Flywheel HP and TRQ on the dyno.
Here are the truck specs:
Troyer XCal2 Tuning - 91 Oct perf tune
Magnaflow SIDO catback
Magnaflow 3 inch resonator in front of the catback
AF1 3.25"
2005 5.4 3V engine
3.73LS
4WD
Supercrew
Duke
I live in Brooklyn Park, MN. What place are you bringing it to and how much is it for 3 pulls.
Member
Joined: Sep 2006
Posts: 71
Likes: 0
From: Brandon, FL
Trending Topics
283
Thread Starter
|
Senior Member
Joined: Apr 2005
Posts: 3,009
Likes: 0
From: In a van down by the river
Originally Posted by ldahlberg
I live in Brooklyn Park, MN. What place are you bringing it to and how much is it for 3 pulls.
763-712-9088
13915 Radium Street NW
Suite C
Anoka, MN 55303
I'll be there at 4 and you're welcome to come if you'd like.
alex_pitts87 and FX4F150FX4, you guys are lowballing (I hope) and I hope for my sake you're wrong as those would be really low numbers for these mods.
Duke
Originally Posted by F150 Duke
Hi Tech Motorsports in Anoka.
763-712-9088
13915 Radium Street NW
Suite C
Anoka, MN 55303
I'll be there at 4 and you're welcome to come if you'd like.
alex_pitts87 and FX4F150FX4, you guys are lowballing (I hope) and I hope for my sake you're wrong as those would be really low numbers for these mods.
Duke
763-712-9088
13915 Radium Street NW
Suite C
Anoka, MN 55303
I'll be there at 4 and you're welcome to come if you'd like.
alex_pitts87 and FX4F150FX4, you guys are lowballing (I hope) and I hope for my sake you're wrong as those would be really low numbers for these mods.
Duke
They are not.. mustang dynos read lower. What a dynojet might read 260, a mustang will read 230.
Member
Joined: Oct 2006
Posts: 29
Likes: 0
Originally Posted by F150 Duke
Hi Tech Motorsports in Anoka.
763-712-9088
13915 Radium Street NW
Suite C
Anoka, MN 55303
I'll be there at 4 and you're welcome to come if you'd like.
alex_pitts87 and FX4F150FX4, you guys are lowballing (I hope) and I hope for my sake you're wrong as those would be really low numbers for these mods.
Duke
763-712-9088
13915 Radium Street NW
Suite C
Anoka, MN 55303
I'll be there at 4 and you're welcome to come if you'd like.
alex_pitts87 and FX4F150FX4, you guys are lowballing (I hope) and I hope for my sake you're wrong as those would be really low numbers for these mods.
Duke
I would have PM you but im still to new. Im just courious do these guys do all the datalogging ( "No Load" & "Load") for the XCAL2. My XCAL2 tunes will be here in about 3 weeks and i want to make sure i do everything correct. I really am confused on datalogging and would rather have some professional do it. Do you have a estimation on how many hrs it will take on a dyno to get all the "No Load" and "Load" information.
Thanks,
Lee
