New Edge to update or not
Senior Member
Joined: Mar 2005
Posts: 1,207
Likes: 0
From: Pittsburgh, PA
What exactly do you mean? I have used the usb cables before for other camera uses
Should the edge lightup if it is in use?
I open the lightning program and it has a blank white screen. I open the "check for updates" on the top and it says all updates are up to date. And then it says edge not connected, try again
Should the edge lightup if it is in use?
I open the lightning program and it has a blank white screen. I open the "check for updates" on the top and it says all updates are up to date. And then it says edge not connected, try again
Senior Member
Joined: Jul 2005
Posts: 1,095
Likes: 0
From: North Little Rock, Arkansas
The edge will not light up while in use. In order for the lightning software to communicate with the Evolution you must preinstall the usb drivers first. If you are running windows xp:
start menu
All programs
Edge Products
USB Drivers
Preinstall USB drivers.
Make sure you don't have the Evolution plugged in during all of this. Also make sure you turn Norton Internet security off while updating the unit.
start menu
All programs
Edge Products
USB Drivers
Preinstall USB drivers.
Make sure you don't have the Evolution plugged in during all of this. Also make sure you turn Norton Internet security off while updating the unit.
Senior Member
Joined: Mar 2005
Posts: 1,207
Likes: 0
From: Pittsburgh, PA
Alrighty...did exactly what you said and still nothing?
This is what comes up and says i have the latest which is untrue
Current available software version:
Software Version: v1.02.0114
Your current software version:
Software Version: v1.02.0114
Then it says it is not connected
I guess im going to give up on it for now...i'll check back later
This is what comes up and says i have the latest which is untrue
Current available software version:
Software Version: v1.02.0114
Your current software version:
Software Version: v1.02.0114
Then it says it is not connected
I guess im going to give up on it for now...i'll check back later
Last edited by Devin4X4; Mar 3, 2006 at 04:18 PM.
Senior Member
Joined: Jul 2005
Posts: 1,095
Likes: 0
From: North Little Rock, Arkansas
The current version v1.02.0114 is correct for the lightning software.
I have a feeling that when you plugged in the edge before installing the usb drivers something got screwed up.
Try using what I said earlier about installing the drivers but click on uninstall usb drivers instead.
Then preinstall the drivers again...then hook edge backup. if this doesn't work...i've got one more trick up my sleeve.
I have a feeling that when you plugged in the edge before installing the usb drivers something got screwed up.
Try using what I said earlier about installing the drivers but click on uninstall usb drivers instead.
Then preinstall the drivers again...then hook edge backup. if this doesn't work...i've got one more trick up my sleeve.
Senior Member
Joined: Nov 2004
Posts: 703
Likes: 0
From: Greenville, SC
I DLed the new update and loaded the new level three tune with some custom options onto PCM. I got the same stalling and bumping whenever truck tried to shift. It ruined my morning. I loaded level three without custom tune and it runs without stalling, but it still sucks as the gear ratio and tire size are still well off.
Here's what pisses me off. Edge needs to do one of two things:
1.) Test their updates before sending them out; or
2.) Send the update out with minimal testing, but allow users to revert to the previously loaded firmware version if necessary.
Because Edge has failed to do either, I am now running around with an update that is worse than what I had. So, if anyone is listening...
Here's what pisses me off. Edge needs to do one of two things:
1.) Test their updates before sending them out; or
2.) Send the update out with minimal testing, but allow users to revert to the previously loaded firmware version if necessary.
Because Edge has failed to do either, I am now running around with an update that is worse than what I had. So, if anyone is listening...
Member
Joined: Feb 2005
Posts: 57
Likes: 0
From: Wichita, KS
Originally Posted by minus_13
I DLed the new update and loaded the new level three tune with some custom options onto PCM. I got the same stalling and bumping whenever truck tried to shift. It ruined my morning. I loaded level three without custom tune and it runs without stalling, but it still sucks as the gear ratio and tire size are still well off.
Here's what pisses me off. Edge needs to do one of two things:
1.) Test their updates before sending them out; or
2.) Send the update out with minimal testing, but allow users to revert to the previously loaded firmware version if necessary.
Because Edge has failed to do either, I am now running around with an update that is worse than what I had. So, if anyone is listening...
Here's what pisses me off. Edge needs to do one of two things:
1.) Test their updates before sending them out; or
2.) Send the update out with minimal testing, but allow users to revert to the previously loaded firmware version if necessary.
Because Edge has failed to do either, I am now running around with an update that is worse than what I had. So, if anyone is listening...
Custom tune was 1-2 shift -2, 2-3 shift -3, 3-4 shift -3 and speed limiter set 120mph.
Senior Member
Joined: Aug 2004
Posts: 394
Likes: 0
From: Wisconsin
Originally Posted by Jakazz
Mine did same thing after I loaded the new software. Went from Firmware 13 and calibration 15a and did not have a problem. Now I go to level 2 tune with custom option, my truck stalls and bumps when it tries to shift. Had to limp it to QT and reprogramm it to stock. Custom tune was 1-2 shift -2, 2-3 shift -3, 3-4 shift -3 and speed limiter set 120mph.
Custom tune was 1-2 shift -2, 2-3 shift -3, 3-4 shift -3 and speed limiter set 120mph.
Member
Joined: Aug 2005
Posts: 87
Likes: 0
From: Denver, CO
Originally Posted by MosineeFX4
Has everyone who has experienced this problem bumped the standard shifts down?
Originally Posted by MosineeFX4
.........it really amazes me that one guy does that much at the company. Sure hope he never gets hit by a truck or something.
Senior Member
Joined: Mar 2005
Posts: 1,448
Likes: 0
From: Texas in the heart
Well, I just tried to update and I got a no flash warning.
then it continued to upload to the EDGE. Now when I plug into the truck, all I get is a funky scribbled screen.
When I tried to reload the update, all I got was a run time error "9", and subscript out of range.
so, anyone know the key code to do a restore to the EVolution?
I knew I shouldn't have done this on a Friday night!!
then it continued to upload to the EDGE. Now when I plug into the truck, all I get is a funky scribbled screen.
When I tried to reload the update, all I got was a run time error "9", and subscript out of range.
so, anyone know the key code to do a restore to the EVolution?
I knew I shouldn't have done this on a Friday night!!
Senior Member
Joined: Feb 2005
Posts: 398
Likes: 0
From: Florida
Add me to the list. In never had any problems with the edge. This new version makes my truck stall. Had to program back to stock.
Waiting for the next update
Hex; OKCM3A3
Waiting for the next update
Hex; OKCM3A3
Last edited by Red05stx; Mar 3, 2006 at 09:35 PM.
Member
Joined: Jan 2006
Posts: 15
Likes: 0
I'm having the same problem here too. It was starting up find with stock tune till I uploaded the new lvl 1 tune. Now its showing errors and says "Check Guage" in the mileage led display. So please help me out too thanks......... last time i do this on a friday night (RXAQ3AZ.HEX) Just email customer service. Hoping for a quick reply..
Last edited by trickyslick; Mar 3, 2006 at 11:36 PM.
Member
Joined: Feb 2006
Posts: 84
Likes: 0
From: Jarrettsville, MD
just sat down to udate for the first time and had a connection problem. Checked in here and realized I needed to disable norton then saw all the update robs, whew, dodged that bullet, No updates for me until . . . .
Senior Member
Joined: Jun 2001
Posts: 1,160
Likes: 0
From: Knoxville, TN.
New info......
Originally Posted by ASEMechanic
Hey all...
As of yesterday, I was informed of 3 individuals whose truck became disabled after updating their Evolutions. Since then, I was told that there are several other vehicles suffering the same problem. I am currently at a loss as to what has caused this condition but it is under intense investigation right now.
In any event, if anyone is having a no start condition after updating their Evolution, give me a call as soon as possible so we can get your vehicle up and running again.
I will be in the office until at least 8:00 PM tonight and you can reach me directly at (801) 337-2162.
Please have your Evolution and your PC handy so we can get through this as quickly and easily as possible. Also, if you have a portable (or cell) phone please try to call on that so I can stay on the line until the PCM is recovered.
I know this situation has everyone frustrated, including me, and I apologize for any inconvenice that this situation may have caused. However, with a little patience we'll get this worked out.
Note: If anyone has seen other threads on this condition, could you please forward this message along. I'd hunt them down, but frankly I'd rather spend the time trying to fix the problem. I appreciate it.
Bill
As of yesterday, I was informed of 3 individuals whose truck became disabled after updating their Evolutions. Since then, I was told that there are several other vehicles suffering the same problem. I am currently at a loss as to what has caused this condition but it is under intense investigation right now.
In any event, if anyone is having a no start condition after updating their Evolution, give me a call as soon as possible so we can get your vehicle up and running again.
I will be in the office until at least 8:00 PM tonight and you can reach me directly at (801) 337-2162.
Please have your Evolution and your PC handy so we can get through this as quickly and easily as possible. Also, if you have a portable (or cell) phone please try to call on that so I can stay on the line until the PCM is recovered.
I know this situation has everyone frustrated, including me, and I apologize for any inconvenice that this situation may have caused. However, with a little patience we'll get this worked out.
Note: If anyone has seen other threads on this condition, could you please forward this message along. I'd hunt them down, but frankly I'd rather spend the time trying to fix the problem. I appreciate it.
Bill