2005 F-150 Shifter Position Light
#1
#3
#6
The bulb is a 168. To replace it open the center console and then pop the plastic trim around the shifter up by inserting a flat tipped screw driver in the hole that the center console lid latches into. The bulb is inside a white holder that is released by turning it 1/4 turn.
#7
Trending Topics
#9
#10
followed the steps and saw that the buld holder was laying lose inside the center counsol. tried to plug it back it but it looks like it melted the plastic around where it plugs in. How would i fix this? Do I have to replace the entire plastic piece that it the bulb and wires twist into?
- Jack
#13
This is obnoxious and I don't think it's worth replacing the whole assembly. I'm just going to try a small dab of epoxy. Enough to hold it, but can easily cut the blob off with an exacto knife next time I need to change the bulb.
#14
Thank you for this thread. I just got a 05 FX4 and noticed a couple lights were burnt out. def love working on my truck after having a BMW for years and not being able to do a dang thing! got the light bulb at o'reilly's (spelling?) and changed it out in 10 minutes. now i just need to replace the lettering that's lit up. it's faded to all hell.