This is my first post here guys and let me tell you this site rocks! Just came from Focaljet.com after a year of tricking out a Focus. SO here is my question. I would like to get a Rim/Tire package to replace my nast stock 16's. I want to stay with a 16" wheel but want bigger tires... How big can I go or should I go before it starts to look like I really need a lift. I also don't want to rub alot. Thanks Guys!

 

First I would like to say welcome...

4x4 or 4x2?

If you have a 4x4 you should be able to run 16x8 or 16x10 with 305's but you may have to crank your bars and trim a little of the valance....

 

Thanks...I have the 4x4 and I would like to fit the largest I can without having to touch anything else...so no mods or cutting. Any ideas?

 

probably 33's without torquing up the bars.... maybe 34 jsut what I have herd!!

 

I will probably go with 32's then If I can find them....I like 31's but they just don't look big enough I think. Thanks Guys!

 

If you don't want to trim your front valance or raise your torsion bars about the biggest you can go with is a 285/75 16 on a 16X8. This looks really nice and should work well for ya. Seen this on a lot of trucks.

 

I have 305's (33's) on my Screw 4x4. 16x8 rims...no rub at all.

 

Yea, guess that would work. I have mine on 10's. That's why mine rub (or did) a little. Just trimmed the corner off the front valance.

 

So if I go with 16x8 I can fit a 305 under their? SWEET!!!!