I'm reading a bunch of people saying it cant be done unless you cut ALOT but that's not true. I have 18x10 Moto metal wheels with a 4.5" back spacing and just a 2.5" level kit. I'm running 35/12.50/18 Federal MT's and ONLY had to trim the lower front valance a 1/4 inch. That's it.

 

Looks good man, I like the 09+ FX4 logo, I changed all my badges to the 09+'s and was going to do that but my steps have to 04-08 FX4 cut into them so I didn't change it... but the truck looks great!

 

Thanks man

 

Turn into a ditch and see if anything happens. It may not for you. If it doesnt awesome. Looks good though. Im still on the fence about the federals. How do you like them?

 

Thanks.....Yes I've turned into several ditches.....no problem. Also I'm loving the Federals

 

Nice truck.

Checked out your forum, looks good. I see you posted your truck on the main page NICE. However there was a Chevy add right at the top (Google ads) - motor trend truck of the year WTF.

 

Thanks ....yeah if you join up you should only see Ford sponsors....otherwise there are a bunch of different sponsors that will show up. Take a moment and join the fun

 

Looks awesome!!

 

Thanks dood

 

i need some advice man. i wanna put a leveling kit on my 08 f150. but im not sure if i need a 2" or 2 1/2" kit. im not a huge fan of the front end sitting slightly higher than the back

 

If it does, just change out your rear block. its simple and i fairly inexpensive

 

yea that's the only trimming that i had to do,,,your truck looks great!!!!!!!!!

 

Thanks Man....

 

I went with a 2" AS and got 2 1/2" out of it. I still have a little bit of rake, which is what I wanted.

Measure from the ground to the center of your wheel wells and you will be pretty close.

 

so would you recommend gettin a 2 1/2" leveling kit? i hardly know anything about trucks. i just know what looks good, i dont know the details it takes to make it happen