Im only running a 50 dry shot, I can definitely feel it but the truck is still slow lol

Please excuse the mess in the truck, I still need hide the feed line







Im just running it on a momentary switch until I get a chance to wire up my mircoedge+ n2o controller



I didnt want to drill into the truck for the bottle brackets so I ratchet strapped the bottle to the seat, It holds it in place just fine

 

time to do the gotts mod and help it out that much more

 

X2, interesting setup though

 

So all your doing is adding nitrous into the airfilter? hmm I might be interested in doing this...

 

yep, with a dry kit you put the nozzle before the maf and the injectors add the extra fuel

 

Interesting. Mind if I ask how much the setup cost you?

 

with the gotts mod the air box wouldn't have had to been modified, he could've stuck the nozzle into the PCV pipe

 

$180ish, bought the kit used for $150, $15 in switches and the rest in wiring. Dry kits are dirt cheap and the bottle will last awhile on a 50 shot. A good rule of thumb is for every 100hp you use 1lb every 10 seconds. The bottle was $40 to fill.

 

How did you wire the system up?

 

very rough ms paint diagram lol