Thank's...wife cleaned up the computer last night and now having trouble posting pictures. It worked awhile ago in the test section.

 

Has anybody every used any of the cheap off brand kits like those found on ebay like this one
http://www.ebay.com/itm/360575623293...84.m1423.l2649
In case this link is no good it's a 2" black billet coil spacer, from a company called "tech custom". It's only $55.
What the problems to look for with a cheap kit? And why are people getting front and rear spacers to level the truck? Wouldn't you just need to raise the front?

 

2 1/2" front 1/4" bigger block in rear. 275/55 R20 tires

 

The kit I got is an eBay off brand. It actually raised it 2 3/4" in the front. Which made it a pain to get the lower strut bolt in at full extension. Because the coil was hitting on the upper a-arm. but Sitting back on the ground you get your fingers inbetween them.
.

 

O yeah, the shock mount extenders are useless. Lol!

 

Imo search for one that offsets the strut inward. It will make installation easier.

 

I've got the 2.5" rough country in the front - nothing in the back. No issues.

Here's a pic side by side in case you're wondering what it looks like. Both 2WD's - Mine is leveled on the right.

 

Here's a pic of mine with the 35's. Very minor trimming and rubbing.

 

This is a better pic

 

Your truck looks great. What leveling kit go you have? You have the same wheel and tire setup that I'm getting except I'm going down to 18's.