6inch fabtech 2inch body

Thread Tools
 
Search this Thread
 
  #1  
Old 01-25-2008, 05:17 PM
santoni's Avatar
Junior Member
Thread Starter
Join Date: Jan 2008
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
6inch fabtech 2inch body

Hey i've been searchin around but i've yet to find an answer to my question so i thought i'd ask....i have an 03 f150 4x4 and i'm putting the 6inch fabtech on it in a few days..so it will have 2inches of body and 6inches suspension....now i'm wondering if my truck will clear 38's with this setup? if not what is the largest tire i can clear with this setup?thnx
 
  #2  
Old 01-25-2008, 05:22 PM
Dallasstars10's Avatar
Senior Member
Join Date: Aug 2005
Location: Texas
Posts: 529
Likes: 0
Received 0 Likes on 0 Posts
I think the largest you can clear is 37" with some minor trimming. You def won't be able to clear 38"s i know that for a fact
 
  #3  
Old 01-25-2008, 05:25 PM
Russ47's Avatar
Senior Member
Join Date: Mar 2007
Posts: 829
Likes: 0
Received 0 Likes on 0 Posts
if you put a 3" body ontop of the 6" suspension you can clear 38's
 
  #4  
Old 01-25-2008, 05:33 PM
santoni's Avatar
Junior Member
Thread Starter
Join Date: Jan 2008
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
k thnx...37's it is....i already have the 2'' bl on there so the 3'' bl is not an option....hmm hope nitto makes a 37'' mudgrappler...anyone have any pix?
 
  #5  
Old 01-25-2008, 05:57 PM
ThumperMX113's Avatar
Suspended
Join Date: Nov 2004
Posts: 17,079
Likes: 0
Received 0 Likes on 0 Posts
Yes Nitto makes a Mud Grappler in that size.
 
  #6  
Old 01-25-2008, 07:31 PM
f150monster232's Avatar
Senior Member
Join Date: Jan 2007
Location: GA
Posts: 782
Likes: 0
Received 0 Likes on 0 Posts
ha you can fit 38s ins only a half in diffrence then 37s sometimes, just crank your t bars and trim..... ALOT
 
  #7  
Old 01-25-2008, 08:47 PM
santoni's Avatar
Junior Member
Thread Starter
Join Date: Jan 2008
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
my torsions are already cranked....by trim do you mean jst the bottom plastic part of the bumper? or the fender aswell?
 
  #8  
Old 01-25-2008, 11:27 PM
ThumperMX113's Avatar
Suspended
Join Date: Nov 2004
Posts: 17,079
Likes: 0
Received 0 Likes on 0 Posts
The front plastic valance and the rear of the fender liner.
 



Quick Reply: 6inch fabtech 2inch body



All times are GMT -4. The time now is 01:56 AM.