i have an 04 fx4 and i just put my 6 in procomp lift and i already had a 3in bl i have 17in rims and 39.5 iroks are these going to rub and if so how bad thanls

 

I dont think those will work, you might be able to fit 38's max with that lift

 

like the tires wont even turn work or i can only drive straight with out rubing

 

your going to rub I think or be very close the thing you have going for you is that those tires are skinny 13.5 so it might be close you will need to get the correct backspace on a 8" rim and it might clear on the road but not off road. But don't let anybody stop you, buy what you want and MAKE THEM FIT thats what I did...

 

turning is for *****s through them on

 

ya i dont mind doing 10 point turns as long as they will run in a strait line were good ALL4FORD i have the same truck only in a step side did you trim the front bumper

 

a little only, I trimmed maybe an inch off in an angle /

 

You will rub for sure, add a 2.5" spacer, and it will take care of the rubbing..