93 f150 brake help!
#1
93 f150 brake help!
Today I was going to replace the front brake pads and noticed the retaining pins were bone dry my question is do these need to be lubed in order for the caliper to work right? Feels like they are sticking And that caused the rotors to get chewed up! If I lube those pins will the calipers not "stick"? I have steel pistons btw maybe a couple of years old
#3
#4
#6
#7
No such thing as a stupid question when it comes to working on brakes.
Every metal to metal contact surface should be cleaned and lubed - not just the pins. Just keep the lube away from the rotors and pads.
Don't even start a brake job without a tube of Sil-Glyde (sold by NAPA) and a few cans of spray brake parts cleaner.
Every metal to metal contact surface should be cleaned and lubed - not just the pins. Just keep the lube away from the rotors and pads.
Don't even start a brake job without a tube of Sil-Glyde (sold by NAPA) and a few cans of spray brake parts cleaner.
Trending Topics
#8
#10
I got the rotors off but I don't know how to get the big bearing in the back of the rotor out? Do I have to go get new ones or can I remove it?
#11
Adrianspeeder
Last edited by adrianspeeder; 09-08-2013 at 01:20 PM.
#12
#13
#15