This will probably load up slow after awhile, but what the heck, we'll start a new one!!

------------------
1993 F-150 4x4 5.0L EFI 5spd. Silver Shortbed..Kelly Safari AWR tires,K&N Air filter,Cat-Back Exhaust. Soon to get: Improved Ignition


[This message has been edited by JOHNNY MC (edited 03-09-2000).]

 

oh man, I'm jealous! I don't have a pic of my 89 F-150!

[img]//www.ford-truck.com/pictorial/big/1990_f150_1.jpg[/img]

I wish I could claim that '90 as mine!!!!

Here's what claim's me!

[img]//members.visualcities.com/NoMo/automotive/pastmaster93.jpg[/img]

It's on Nomo's site, so I don't know if it'll work or not!



[This message has been edited by Pastmaster (edited 03-09-2000).]

 

at least that thing is gone

[This message has been edited by JordanB (edited 03-09-2000).]

 

JordanB...Go to General Discussion and on page 2 there is a thread on pictures...Tells you exactly what do do...may take a few? LOL times to master it....

[This message has been edited by JOHNNY MC (edited 03-09-2000).]

 

helpin you out Johnny
www.f150online.com/f150board/Forum41/HTML/000014.html

 

LOL LOL, Copy and paste...GGEEEZZZ

------------------
1993 F-150 4x4 5.0L EFI 5spd. Silver Shortbed..Kelly Safari AWR tires,K&N Air filter,Cat-Back Exhaust. Soon to get: Improved Ignition

 

alright now how do i make it smaller?
thanks for helping out the low tech guy
jb

 

I am, by no means, an expert with this picture thing. I know when I've downloaded the picture originally from the camera to the computer, I had an option of "sizing" it...25%-50% etc. It's in a album from which I had originally downloaded to SS97's community(Thanks Again) and I still have the option to size it. You might have to download a smaller pix to a web site and then transfer again...I really don't know!!

 

hhmmm, where did this come from?




[This message has been edited by JOHNNY MC (edited 03-10-2000).]

 

http://www.angelfire.com/ky2/ford/truck2.jpg

Here ya go this is my baby before any mods! Looks much better now!

[This message has been edited by BMW325 (edited 03-09-2000).]

 

Jordan, there's quite a gap between your bumper and your grille!

 

[This message has been edited by JordanB (edited 03-09-2000).]

 

Yeah that is from not finishing the job when i did the body lift. I actually put two blocks in there so the bumper sticks out about 3 more inches. It looks pretty good in real life, and it is much better for standing on when you are working under the hood. The vertical gap isn't as big as it used to be. I am going to try and get updated pics of it without the gap and without the hood deflector. Thanks for the help getting that thing posted, it shouldn't be as enormous now, it was almost life size for a while there..
JB

------------------
92 reg cab flareside 302 w/8.8 rear. Custom cat back exhaust with glasspacks and dual chrome tips. Summit performance headers, K&N air filter. Performance accesories 3" body lift, 33x12.50 sport kings on 15x10 chrome mod rims. Better built diamond plate toolbox. Aiwa cd player with JBL amp to two 6-1/2's and two 10" subs in boxes. NEW: Ford the best never rest floor mats (pretty sharp) Best mod to date: taking off the huge egr hood deflector.
Check out my truck at http://geocities.com/fattron/jb.html

 

OK, I'll try it! Here's my little squirrel cage for my '82 F150:

[img]://www.eastcoastperformance.homepage.com/pics/steve2.jpg[/img]

Edelbrock waterpump, Performer intake, air cleaner, and carb; Doug Thorley Tri-Y headers; etc.

Slik

 

OK, one more time for my mill driving my '82 Ford F150:

[img]//www.eastcoastperformance.homepage.com/pics/steve2.jpg