My antenna is a Wilson Silverload 4' fiberglass. Attached via a stak hole mount from Walcott CB. SWR is below 1.5.

 

i have cb mounted to center of seat i will post pics tomorrow(home made bracket, actually got idea from another member on here, thanks) (cause it's raining right now) with a 3 ft firestick mounted on the tool box

 

i have a cobra 19 and a 3 ft firestick but im wanting to get the cobra 18 so i can do a double din mount cb/radio and i wanna get a mount so i can mount my antenna on my toolbox. hey does anyone know how i can do a double din install with a radio/cb installation would be nice

 

wow that setup is badass. did u install a fan down there? i might've put in a little 130mm from a computer or whatever to help circulate the heat down there

 

here is a picture of how my cb is mounted in my console

 

went ahead and mounted mine here a few months ago. out of the way yet easy to use.

 

how do you got yours wired up southern

 

I have what i call a "bus" mounted to my firewall where i pulled one 10 AWG wire from the battery to and can have an accesable 12v source in the cab. just wired it up to that. coax runs down drivers side under carpet, up c-pillar and inside headliner and out 3rd brake light.