Lightning

Ford's Quality Control Is Crap

Old May 14, 2003 | 09:34 AM
  #1  
MHMCGILL's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2001
Posts: 1,225
Likes: 0
From: Pacific Northwest
Ford's Quality Control Is Crap



Look what I found when I was installing speakers last night. I had my kids restrained by this seat belt. I mean WTF. Held in by a zip tie. I sure hope Ford reads this. I can put up with a clunk and noisey tourqe converter, poor gas mileage, but saftey is where I draw the line.

Any advice as to what to do, other than getting it fixed of course would be appreciated. What I would like is an apology of some sorts I guess from someone other than the low man on the totem pole. We'll see what happens when I take it in this afternoon.

PS can somebody host the picture in this thread, I tried but not sure how. Thanks
 

Last edited by MHMCGILL; May 14, 2003 at 09:37 AM.
Reply
Old May 14, 2003 | 09:37 AM
  #2  
blowntruck's Avatar
Senior Member
Joined: Jan 2002
Posts: 1,991
Likes: 0
From: Columbia, MD
 
Reply
Old May 14, 2003 | 09:42 AM
  #3  
dboat's Avatar
Senior Member
Joined: Mar 2002
Posts: 555
Likes: 0
From: Erie,PA
Just trying to make sure I have the facts.

Was it only being held by the ziptie? or did you find the ziptie after you took out the bolt, meaning that the ziptie and the bolt were holding it in?

Dana
 
Reply
Old May 14, 2003 | 09:43 AM
  #4  
TINNMAN's Avatar
Senior Member
Joined: Jan 2003
Posts: 186
Likes: 0
From: Panty-raiding the M.S.U.'s girl's dorms...



Welcome to the wonderful world of Ford ownership.....

I do believe Ill be checking my belts now...
 

Last edited by TINNMAN; May 14, 2003 at 09:53 AM.
Reply
Old May 14, 2003 | 09:47 AM
  #5  
MHMCGILL's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2001
Posts: 1,225
Likes: 0
From: Pacific Northwest
Was it only being held by the ziptie? or did you find the ziptie after you took out the bolt, meaning that the ziptie and the bolt were holding it in?
That is exactly the way I found it. I watch CSI you know. I didn't touch the "scene"

What I can't figure out is why the bolt didn't roll up by my feet when I stopped. I guess I have'nt done any panic stops.
 
Reply
Old May 14, 2003 | 09:48 AM
  #6  
SpankDog's Avatar
Banned
Joined: Jul 2002
Posts: 3,130
Likes: 0
From: Buford, GA
My truck had the same problem but i didn't even have a zip tie. My girlfriend and some others had sat in the middle seat a few times and then one night they actually pulled on the belt, it just came right out. WTF?
 
Reply
Old May 14, 2003 | 09:54 AM
  #7  
dboat's Avatar
Senior Member
Joined: Mar 2002
Posts: 555
Likes: 0
From: Erie,PA
Re: Ford's Quality Control Is Crap

Originally posted by MHMCGILL


Look what I found when I was installing speakers last night. I had my kids restrained by this seat belt. I mean WTF. Held in by a zip tie. I sure hope Ford reads this. I can put up with a clunk and noisey tourqe converter, poor gas mileage, but saftey is where I draw the line.

Any advice as to what to do, other than getting it fixed of course would be appreciated. What I would like is an apology of some sorts I guess from someone other than the low man on the totem pole. We'll see what happens when I take it in this afternoon.

PS can somebody host the picture in this thread, I tried but not sure how. Thanks
I would send an email with the pics to one of the higher ups at Ford and explain what happened. Also, state that there was the potential loss of life should an incident actually happen. I do know that someone posted those email addies here at one time. Its about the best you can hope for.. if they are decent people they will send you an apology letter and tell you to bring it in to be checked out right away.
Good Luck,
Dana
 
Reply
Old May 14, 2003 | 10:03 AM
  #8  
MHMCGILL's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2001
Posts: 1,225
Likes: 0
From: Pacific Northwest
If anyone could tell me who to email I sure would appreciate it. Should I call SVT and try that route or something else?

Thanks for letting me vent. I'm the type of guy that checks all the doors at night before I go to bed even after my wife has already done it, I'm the type of guy who practically gets a friggin ulcer when my kids get sick, so suffice to say I worry about my families well being or I have Obsessive Compulsive Disorder. Probabaly more info than you wanted to know. Thanks.
 
Reply
Old May 14, 2003 | 10:14 AM
  #9  
Fast Gator's Avatar
Senior Member
Joined: Apr 2000
Posts: 12,632
Likes: 1
From: Stinkin Joisey
Man thats completely UN-ACEPTABLE......

I have had my pass seat out a few times and my center belt was bolted down. Buts thats not helping you. Thank God you saw that before anything did happen.
Ford Motor Co e-mail would be anybodys name @ ford.com

I would start with JColetti@ford.com. Send the pic with an attachment and go from there. I would also take a pic of the zip-tie to my dealer so they would be aware of this problem. Maybe it would spare somebody the anguish of finding out the hard way
 
Reply
Old May 14, 2003 | 10:20 AM
  #10  
LatemodelRacer2's Avatar
Senior Member
Joined: Jan 2002
Posts: 3,709
Likes: 0
From: Jasper Alabama
I guess i will take my seats out today and check my belts. How long have your truck for that bolt to be laying there unnoticed and not moved.
 

Last edited by LatemodelRacer2; May 14, 2003 at 10:23 AM.
Reply
Old May 14, 2003 | 10:21 AM
  #11  
MHMCGILL's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2001
Posts: 1,225
Likes: 0
From: Pacific Northwest
Thanks I'll try that.
 
Reply
Old May 14, 2003 | 11:32 AM
  #12  
device manager's Avatar
Senior Member
Joined: Sep 2002
Posts: 359
Likes: 0
From: TX
I am going to check my belts right now!!
 
Reply
Old May 14, 2003 | 11:45 AM
  #13  
MHMCGILL's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2001
Posts: 1,225
Likes: 0
From: Pacific Northwest
I got the 'L a week ago friday, so about twelve days ago.
 
Reply
Old May 14, 2003 | 11:53 AM
  #14  
skuter99's Avatar
Member
Joined: Sep 2002
Posts: 36
Likes: 0
Go To The Top

For an issue this important, just go right to the top!!
wford@ford.com
Let the BIG boss know what is going on,
Skuter99
 
Reply
Old May 14, 2003 | 12:01 PM
  #15  
Six Spd Z28's Avatar
Registered User
Joined: Sep 2002
Posts: 288
Likes: 0
From: Alabama
MHMCGILL,
I am not suprized.
My 2003 was missing the reflector around one of the cargo lights and 2 of the 3 screws that hold the dome light were hardly threaded into the bracket. I havent found anything else yet, but I am looking.
Sorry that yours was a safety issue...thats serious business!
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:06 AM.