Let's start over......
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Looks good. That stuff is pretty easy to work with.
A guy told me you can take a punch or chisel to the cut ends you can make them look more like the stone it self. That way you don't have the sawn end showing. Try it out on some scrap and see if you like it, might make the corners look a tad better.
A guy told me you can take a punch or chisel to the cut ends you can make them look more like the stone it self. That way you don't have the sawn end showing. Try it out on some scrap and see if you like it, might make the corners look a tad better.
ya I could've sheetrocked it and slapped some paint on it and been done two weeks ago....but this stuff is fun and a challenge to work with.. imo
Last edited by 88racing; Aug 12, 2014 at 09:41 AM.
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
even their base work truck models are more expensive than ford's.....
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
we are having the coolest summer on record up here this year.....weird
Senior Member
Joined: Feb 2007
Posts: 4,535
Likes: 28
From: Lockport, La.
Down here going from the 90's into the 80's and lower humidity is called a cold front. I'll take it!
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
I would too....
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
pft.....
100 ft up today....
took some dramamine before work so don't get land sick when I get off the lift....
100 ft up today....
took some dramamine before work so don't get land sick when I get off the lift....
Global Moderator &
Senior Member
Senior Member
Joined: Aug 2005
Posts: 21,337
Likes: 158
From: DFW
A guy I work with traded in a 09? Chevy RC V6 (upside down on loan) on a 14 GMC Extended cab V6 base model with vinyl floor and is now 50k in debt.
He said he prefers Chevy/GMC because he can PTM the emblems on the truck
He said he prefers Chevy/GMC because he can PTM the emblems on the truck