Let's start over......
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,083
Likes: 85
From: Burleson/Athens/Brownsboro, TX
__________________
Jim
Jim
Global Moderator &
Senior Member
Senior Member
Joined: Mar 2005
Posts: 26,083
Likes: 85
From: Burleson/Athens/Brownsboro, TX
Nope, the OP requested it be deleted and RP obliged her.
__________________
Jim
Jim
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
Saw something kind of interesting tonight after work at Target. One place in their parking lot has a slope in it and someone in a Ranger "parked" there. I was getting ready to walk through the front door and someone said "Someone's truck's rolling through the parking lot and no one's in it!" Everyone turned around then you heard someone yell and go running towards the truck. The guy got in and took off, never even went in the store :lol
It actually rolled a pretty good ways.
It actually rolled a pretty good ways.
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Saw something kind of interesting tonight after work at Target. One place in their parking lot has a slope in it and someone in a Ranger "parked" there. I was getting ready to walk through the front door and someone said "Someone's truck's rolling through the parking lot and no one's in it!" Everyone turned around then you heard someone yell and go running towards the truck. The guy got in and took off, never even went in the store :lol
It actually rolled a pretty good ways.
It actually rolled a pretty good ways.
Got my new badges in and getting ready to put them on, anything i need to know as far as removing old ones and putting new ones on. Anyone ever painted them either? How did you sand the black part or did you even sand it?
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
On my way home today, I was ran of the interstate and hit a hole. The girl was texting on her phone. Now my truck shakes really bad. She was ticketed for her wrong doing. When get up around 50, its bad. Don't know if the rim is bent or not. But when I got home, I found that some weights are missing. I have this picture from my phone. Hope it loads so y'all can tell me what y'all think.
Senior Member
Joined: Apr 2006
Posts: 1,501
Likes: 1
From: Butler, Pennsylvania
That sucks Randall!!! How fast were you going when you hit the hole? Should have taken her phone and ran it over. 
I can't make out the picture too well. I hope it ends up being the weights that's making it shake.
When my dad had his 04 he hit something going through someones yard between 5-10mph and it bent the mount that's welded to the frame for the lower A-arm.
I can't make out the picture too well. I hope it ends up being the weights that's making it shake.
When my dad had his 04 he hit something going through someones yard between 5-10mph and it bent the mount that's welded to the frame for the lower A-arm.