whistling intake?
Senior Member
Joined: Apr 2010
Posts: 689
Likes: 0
From: San Marcos, TX
Just till Monday. I hope it shall survive. Are the 06s really that prone to issues. Haven't heard any pinging and haven't had any lean codes. The programmer comes Monday. Valentines day (which the lady shall not know about) so I hope I'm okay till then. Have warranty if not. Haha. diablosport with Cai canned tune. Easy there fellas us ex gm owners aren't used to these lean issues. Although I had a 99 2wd v6 in the past. Went Yukon then tacoma then sierra now back to f150. Gonna keep this one.
You should be good until you get the programmer installed tomorrow.
Senior Member
Joined: Feb 2004
Posts: 10,390
Likes: 10
just till monday. I hope it shall survive.
Are the 06s really that prone to issues. yes.
haven't heard any pinging and haven't had any lean codes. means nothing -only direct measurement can tell you.
The programmer comes monday. Valentines day (which the lady shall not know about) so i hope i'm okay till then. cross fingers, lol.
have warranty if not. Haha. Diablosport with cai canned tune. Easy there fellas us ex gm owners aren't used to these lean issues. Although i had a 99 2wd v6 in the past. Went yukon then tacoma then sierra now back to f150. Gonna keep this one.
Are the 06s really that prone to issues. yes.
haven't heard any pinging and haven't had any lean codes. means nothing -only direct measurement can tell you.
The programmer comes monday. Valentines day (which the lady shall not know about) so i hope i'm okay till then. cross fingers, lol.
have warranty if not. Haha. Diablosport with cai canned tune. Easy there fellas us ex gm owners aren't used to these lean issues. Although i had a 99 2wd v6 in the past. Went yukon then tacoma then sierra now back to f150. Gonna keep this one.
Member
Joined: Feb 2011
Posts: 33
Likes: 0
From: TX
I got the bully intake, had that high pitched wistle and had to do modifications. They supply you with a rubber elbow that's used to relocated the throttle up from the intake. Well that rubber elbow was collapsing because of the vacuum created by the motor. I stuck the throttle body back down to the intake, went to the local hardware store and bought an elbow to go from the throttle body to the cold air intake. Also ordered a edge programmer cause of it.
Senior Member
Joined: Apr 2004
Posts: 13,679
Likes: 84
From: missing Texas...
I got the bully intake, had that high pitched wistle and had to do modifications. They supply you with a rubber elbow that's used to relocated the throttle up from the intake. Well that rubber elbow was collapsing because of the vacuum created by the motor. I stuck the throttle body back down to the intake, went to the local hardware store and bought an elbow to go from the throttle body to the cold air intake. Also ordered a edge programmer cause of it.
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
Yes....along with the gotts/dwv mod to the intake end by the fender....
