we cant fig it out the all work intel you push break then the drive stop like the break light and it light is dim in the driver back

 

What are you working on?

We can't see this through the Internet.

 

2001 ford 150 supercrew break wiring

 

Ray - What exactly is dim? The cab high mount brake light or the brake lights on the bed? Or all of them?

 

Back Driver turn single i have put new lights in it and we ran a wire form the front back now i all work but the front stop blinking when the break paddle is applied and the back work just look dim the passenger side is fine and the camper light is good but now that blinking too when you turn the left single on

 

It sounds like you got the turn signal and the brake light wired together. Are you sure you wired it up correctly?

 

that my issue i been looking some where to find out where to get the info for it or how to fix it im not a 100% sure what wrong with it i dont think the guy before knew what he was doing i just got the truck last week i dont have and book on the truck or and thing that u get in the glove box

 

Well, for starters, you can get your owners manual for the truck here:
https://owner.ford.com/tools/account...r-manuals.html

Here's a wiring diagram...

 

thank you i well try it and go from there

 

No problem. Report back if you have any questions. Hopefully by then, someone else will have some extra pointers that they can share. We've got some savvy folks in here.