Another edge problem
Junior Member
Joined: Mar 2007
Posts: 13
Likes: 0
Originally Posted by TennesseeTritan
I spent half of the day Sat. trying every combo I could think of, driving the truck to test it,wasting my 93 octane, and nothing worked. There has to be something different with the 06 because look at all the members on the previous page that own a 2006 model, and the ones that say they had no problems owned another model year. There is no doubt in my mind that Ford changed something in the PCM in the 06 model year but, the box my Edge came in includes the model year of 06 so they should have it compatable with my pcm. I am 100% positive user error can be ruled out
I have an 06 xlt SuperCrew 4x4 and have had absolutely no problems with the Edge. Every feature works for me and no shudder. I also have the AEM Brute and MagnaFlow 16612. This tuner rocks 
Thread Starter
|
Member
Joined: Dec 2006
Posts: 82
Likes: 0
From: Nashville,TN
Originally Posted by jonas3737
Yeah.. gonna have to dissagree with ya on this. I have an 06 xlt SuperCrew 4x4 and have had absolutely no problems with the Edge. Every feature works for me and no shudder. I also have the AEM Brute and MagnaFlow 16612. This tuner rocks
I have an 06 xlt SuperCrew 4x4 and have had absolutely no problems with the Edge. Every feature works for me and no shudder. I also have the AEM Brute and MagnaFlow 16612. This tuner rocks 
Member
Joined: Oct 2006
Posts: 55
Likes: 0
From: Cheyenne, WY
I have 91 octane in mine and have adjusted the timing for my altitude and even corrected the speedo for correct tire size (using GPS). I have not had a problem at all. I do notice the shudder going from 1st to 2nd under heavy acceleration. Other than that, this thing makes my truck bad a$$ compared to the factory tune!!!! 
Thread Starter
|
Member
Joined: Dec 2006
Posts: 82
Likes: 0
From: Nashville,TN
Digging up an old thread here but has anyone who had this problem corrected it ? Is there a revision out to fix it yet? I think the've had enough time to get it fixed. (one would hope)
Member
Joined: Sep 2007
Posts: 41
Likes: 0
From: Youngsville NC (Outskirts of Raleigh)
Custom programing problems 2 years now
Hello all,
Ive been in here and everywhere else looking for the same answers you are looking for 2 weeks now. It don't exist. Im running a 2005 5.4 Liter also and have the same problem as well as some others when connected to the computer, I have emailed them for 2 weeks and have not got a response yet.
If you look thru the forums you will find that people were having the same issues in March of 2006. I dont know why they havent fixed this crap yet.
Level 3 hicccups, yes I got em
Custom programing, Yes I got em too. Nothing I put in works.
Also the software wont pickup on my data streams either. Weather I put in on stock and take one or another level, it don't work.
The software doesnt even reconize what model im plugging in to the computer. (says my memory on the edge might be corrupted)
Yesterday I sent them an email and informed them that I am sending the unit back if I dont get an answer today.
You would think that if they are aware of these problems they would at least put something on the web site addressing it so people arent in the dark.
And ive installed all of the latest updates. And the updates I noticed don't match my HEX in the list.
Anyway, thats my .02
Hope somebody gets and answer soon. until then
Ive been in here and everywhere else looking for the same answers you are looking for 2 weeks now. It don't exist. Im running a 2005 5.4 Liter also and have the same problem as well as some others when connected to the computer, I have emailed them for 2 weeks and have not got a response yet.
If you look thru the forums you will find that people were having the same issues in March of 2006. I dont know why they havent fixed this crap yet.
Level 3 hicccups, yes I got em
Custom programing, Yes I got em too. Nothing I put in works.
Also the software wont pickup on my data streams either. Weather I put in on stock and take one or another level, it don't work.
The software doesnt even reconize what model im plugging in to the computer. (says my memory on the edge might be corrupted)
Yesterday I sent them an email and informed them that I am sending the unit back if I dont get an answer today.
You would think that if they are aware of these problems they would at least put something on the web site addressing it so people arent in the dark.
And ive installed all of the latest updates. And the updates I noticed don't match my HEX in the list.
Anyway, thats my .02
Hope somebody gets and answer soon. until then
Former Sponsor
Joined: May 2004
Posts: 126
Likes: 0
Originally Posted by TennesseeTritan
Digging up an old thread here but has anyone who had this problem corrected it ? Is there a revision out to fix it yet? I think the've had enough time to get it fixed. (one would hope)