WRAP - Help redesign
#1
WRAP - Help redesign
Wrap and fender flares removed
(2018 F-150 with Fab Four bumpers, 2 inch leveling kit, wrapped rocker panels and hood, black fender flairs, Belair shell, Fuel rims)
UPDATE: I removed the black fender flares, rocker panel wrap and left the hood wrap. I think it looks better. It'll look even better when I get the roof rack up. I think the problem I have is that this is a new truck and an old school top. It's hard to make them match. That top would have looked badass but I couldn't find an older truck with an 8 foot bed and rear doors that opened (so I could remove the rear seats and build storage there) and thought I could pull this off.
- - -
Hi guys,
So I really liked the wrap on this Ram (shhhh...) and tried to emulate it but the guys who did the wrap cut off the 4x4 section (the black should go all the way to the top of the bed instead of being cut off with a black line). They'll redo the wrap as I just described like it is on the Ram or I can do something else with this section for free. Any ideas? I can just continue the thin line in that section. I can keep the large section and add something other than 4x4. Thoughts?
ALSO...I'm not happy with the overall look and it might be more than just the 4x4 section. Thoughts? Remove the wrap entirely along with the fender flares? Or maybe just remove the wrap on the hood? Maybe add something to the camper? I'm lost! Little help?
I'll include a few different shots including an all white, no wrap and no flare shot AND no steel bumpers.
Thoughts?
Ram - I like this wrap
Last edited by f150Camper; 04-17-2019 at 08:17 PM.
#3
#5
#6
There's actually no sag in the rear...it's just the photo angle. Check the shot w/ no wrap...same weight in the bed but no sag.
#7
Trending Topics
#8