My bedcaps are almost grey. Im thinking it might be too late on getting them back black? So is there something to bring the black back or do I have to paint them again?

 

Take em off or tape em off and paint them. I know others will chime in about different products but I think painting is gonna be your best bet.

 

Pop them off and shoot them with some Krylon Fusion, everything else is just a temporary fix. I did mine about 2 weeks ago, they look brand new and should last a cpl years..

 

how hard are they too pop off? Also my bumper covers are faded almost to gray.

 

just popped mine off a couple days ago and hit them with a little primer and paint..it was a breeze to take em off, all i did was squeeze each side and pull right up. then just make your way down doing the same thing. All i need to do now is put a clear coat on them just so theyll last a little longer. but yea i think it will be your best bet to just paint them!

 

I started in the back by popping up the end then slid my hand under the bedrail prying and popping them up as i worked my way to the front.. Didn't break one clip. Bumper covers i'd prob tape it up REAL good and shoot it on the truck..

Goodluck..

 

I just did mine the other day, real easy to get off, make sure you dont break any clips. Sand them down, put primer and shoot a couple coats of paint and your good.

 

Mine are black with a little effort, see below.

https://www.f150online.com/forums/ar...nting-how.html

 

I did this trick for my bumper and step sides.

http://www.youtube.com/watch?v=lk8U5tKQXQw

 

Paint em but im gonna chime in and say use a plastic primer the spray them with rustoleum and not Krylon fusion.

Thats what I did and its like a bullet proof paint on the plastic

 

dang I went to pull mine off today and damm it was hard when I pulled up it felt like I was gonna break the tabs is there a trick to it?