How to Paint Black Out Badges w/ DSG Inlays (Pics)
#31
No, I did not have any problems with the plastic on my emblems. Several members have complained about peeling, but I did not see it on my truck. You might try a hair dryer or a heat gun to see if you can get the plastic off easier when it is hot.
I used my wife's hair dryer to heat up my FX4 stickers when I removed them. They came off quite easily and did not leave any residue on the truck.
KR-Texas
I used my wife's hair dryer to heat up my FX4 stickers when I removed them. They came off quite easily and did not leave any residue on the truck.
KR-Texas
#33
Truck looks great. I don't know if you know or if someone else does, how hard is it to take the oval off the tailgate? I want to paint mine and put an overlay on it but I would like to take if off to do that. Any info or advice would be great. Also, I noticed on your truck bio that you have true dual exhaust. Did you by the kit that way or have it custom done? I would like to do it on my truck but with the gas tank being on the left side i don't know how that would work. Thanks.
#34
I did not try to remove the rear one, so I am not sure how to do it. Other members have removed them, so you might try a search and find the details. It was not hard to tape off the back of my truck and since I was already doing the F150 badges, I just did them all at the same time.
I had my local exhaust shop custom fabricate my true duals. The cost was $420 with the two 11" MagnaFlow mufflers and the 3.5" x 22" SS tips.
My tank is also on the left side and here is how they did mine with an X-Pipe:
A good shop will not have any problems routing both pipes down the right side of your truck.
KR-Texas
I had my local exhaust shop custom fabricate my true duals. The cost was $420 with the two 11" MagnaFlow mufflers and the 3.5" x 22" SS tips.
My tank is also on the left side and here is how they did mine with an X-Pipe:
A good shop will not have any problems routing both pipes down the right side of your truck.
KR-Texas
#36
Did my badges. Im happy with them I dont have my inlays for the F 150 yet so I taped it off P I T A ! But it came out ok. [IMG][/IMG] pic is little fogy its like 112 today so taking the camera outside foged it up you can get the idea with this one Ill get better pics soon [IMG][/IMG] Thanks for the great wright up!
#38
Here is the writeup with a few more pictures up close.
https://www.f150online.com/forums/ex...tips-pics.html
KR-Texas
#39
KR-Texas
#40
I've got the rest of the pix here
https://www.f150online.com/forums/me...acked-out.html
#42
I used a small needle to pop the air bubbles on the inlays. After a day or two the holes disappeared and I cannot see them any more. Two months later, they still look good...
KR-Texas
#43
You can try it for yourself, but I think you will buy the inlays...
KR-Texas
#45
Hey KR, I'm sure I've told you this before, but your truck looks freaking awesome ! I used to not care for the Rock Stars, but they have really grown on me, and they look great with those tires.
Like your T-bar grille too.
They don't enforce having a front plate in Texas ? Sure wish they didn't here in my town Oh but hey, have you thought about putting a frame, and a lightly smoked acrylic cover over your rear plate ? I have covers on my front and rear and I think it looks WAAAY better, than without.
Your tutorial for the badges was good too. The only thing I did / would do differently is, I'd replace that primer with Bulldog spray. IMPO Krylon primer is only a "very little bit" stickier than regular Krylon spray. But Bulldog is the stickiest $#!+ on the planet ! Heck, it will make paint stick to chrome, glass, plastic, anything !
Oh hey geoelpalillo, the chrome used on plastic, really is actual chromium plating. The way they are able to get an electrical current around the plastic, is that they "vapor" deposit a layer of copper, at the molecular level, first. If you sand on that chrome enough, you can see the layer of copper, before you break through to the plastic...... but you really want to avoid breaking through to the plastic.
And hey Geo, my badges are 1 year old, but I took this shot a few days ago. Not a chip one, on any of them, after using Bulldog adhesion promotor.
Peace,
Fish
Like your T-bar grille too.
They don't enforce having a front plate in Texas ? Sure wish they didn't here in my town Oh but hey, have you thought about putting a frame, and a lightly smoked acrylic cover over your rear plate ? I have covers on my front and rear and I think it looks WAAAY better, than without.
Your tutorial for the badges was good too. The only thing I did / would do differently is, I'd replace that primer with Bulldog spray. IMPO Krylon primer is only a "very little bit" stickier than regular Krylon spray. But Bulldog is the stickiest $#!+ on the planet ! Heck, it will make paint stick to chrome, glass, plastic, anything !
Oh hey geoelpalillo, the chrome used on plastic, really is actual chromium plating. The way they are able to get an electrical current around the plastic, is that they "vapor" deposit a layer of copper, at the molecular level, first. If you sand on that chrome enough, you can see the layer of copper, before you break through to the plastic...... but you really want to avoid breaking through to the plastic.
And hey Geo, my badges are 1 year old, but I took this shot a few days ago. Not a chip one, on any of them, after using Bulldog adhesion promotor.
Peace,
Fish