2009 - 2014 F-150
Sponsored by:
Sponsored by: DashLynx

OEM Skid Plates for '09-'11 ?

Thread Tools
 
Search this Thread
 
  #1  
Old 07-16-2011, 12:41 AM
NikonMan's Avatar
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Question OEM Skid Plates for '09-'11 ?

Guys - anyone have the part numbers for the front, center and tank skid plates with all the bolts and straps handy? Looking to add them to my rig.

Tasca has them but the parts explosion diagram has so many components - not sure if I need them all, etc.

Here is what I think is correct:

9L3Z-5D032-A (Front)
9L3Z-7E063-A (Mid)
9L3Z-9A147-D (Fuel Tank)


Thanks in advance!!!
 
  #2  
Old 07-16-2011, 01:59 PM
canadianelbow's Avatar
Senior Member
Join Date: Mar 2010
Location: Calgary, Alberta
Posts: 1,526
Likes: 0
Received 1 Like on 1 Post
You should expect for the plates to come without any hardware at all. I would be shocked if any bolts were included.
 
  #3  
Old 07-17-2011, 11:06 AM
marshal's Avatar
Senior Member
Join Date: Jul 2010
Location: Louisville, KY
Posts: 527
Likes: 0
Received 0 Likes on 0 Posts
i would avoid OEM and buy these, much better

http://www.heftyfabworks.com/shoppin...=0&sort=normal
 
  #4  
Old 07-18-2011, 01:03 AM
zirrow's Avatar
Member
Join Date: Jun 2009
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
will those fit on a non-raptor?
 
  #5  
Old 07-18-2011, 10:55 AM
gDMJoe's Avatar
Senior Member

Join Date: Oct 2010
Location: Timbuk3 MI
Posts: 852
Received 12 Likes on 12 Posts
.
2009-10 F-150 Parts List ««« right -click-
» Save Target As... » < desktop file >
 
  #6  
Old 07-21-2011, 10:47 PM
Mwcarter41's Avatar
Member
Join Date: Dec 2010
Location: Mechanicsville, VA
Posts: 91
Likes: 0
Received 0 Likes on 0 Posts
I have installed a lift on my 09 F150 Screw FX4 and have the original Ford Skid Plate and many other oem parts if your still interested in buying. I'm not sure what they go for but if your interested in mine, make an offer and we may be able to make a deal. I also have a whole box of original hardware that shop gave me, may be able to find the hardware for it as well. Truck only had about 30k miles when lift was installed so parts are in very good condition. I live in Mechanicsville, VA 23111, which I am willing to drop off at ups or fedex if you pay shipping. You may also email me at mwcarter41@yahoo.com
 
  #7  
Old 07-23-2011, 07:20 AM
Franklindeez's Avatar
Member
Join Date: Apr 2011
Location: Northern Virginia
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by zirrow
will those fit on a non-raptor?
? I'd like to know as well.
 
  #8  
Old 07-30-2011, 10:07 AM
marshal's Avatar
Senior Member
Join Date: Jul 2010
Location: Louisville, KY
Posts: 527
Likes: 0
Received 0 Likes on 0 Posts
i don't know why they wouldn't. a raptor is an F150 too. its not like the frame is different. the only thing i see not working is the fuel tank skid, because the raptor has the smaller tank. however - i don't know if they went to the 36 gallon tank in the 4 door raptors.
 
  #9  
Old 07-30-2011, 10:38 AM
Augster's Avatar
Senior Member
Join Date: Jun 2011
Posts: 236
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by NikonMan
Looking to add them to my rig.
I would certainly go for a much sturdier aftermarket plate than the OEM because the OEM are quite flimsy, IMO (they flex easily with your finger) whereas aftermarket stuff is usually 1/4" thick or more and can take way more abuse than the OEM stuff.

Unless you can get the factory components very cheap and cost becomes an overriding issue...
 
  #10  
Old 07-30-2011, 01:12 PM
zirrow's Avatar
Member
Join Date: Jun 2009
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
The frame may be the same, but with the SVT a-arms, I'm not sure that everything else under there would allow the same fit. Ford Racing offers an enhanced skid plate for the Raptor that is not listed as being for a non-Raptor, so...
 



Quick Reply: OEM Skid Plates for '09-'11 ?



All times are GMT -4. The time now is 12:57 AM.