I replaced my wheel bearing on o5 and now I have no 4X4 Lo or Hi. I found the bearing easy to replace. Also I have some noise when I push on the gas at high speeds 80 km to 110 km. Any help would be appreciated.
Thanks

 

is this an 05 or 95?

what part of NF are you from?

 

2005 and Clarenville

 

is the motor sound like it engages and does the LO or HI indicator show up on the dash?
i have family in St. johns

 

Lo and Hi light show up wnen I turn the key but not when put in 4X4 all black.
I dont think there is any noise when put in 4X4.

where you live now

 

im in boston

could be the motor on the back of the tranfer case.. try starting the truck shifting into 4Hi and get underneath and located the transfer case 4wd motor and tap it with a hammer .... sometimes the motors jam up. happened to mine and had to wack it in the winter ... hasnt acted up since

 

i will give it a try. Thanks

 

no problem

 

OMG Worked, you are a genious. 4Hi and 4 LO working.
Thank You Thank You.

I got to go to work now but I will see if that noise has gone at higher speeds. Let you know tommorrow. Thanks again.

Clin

 

welcome man! just one glorious truck owner helping out another haha