Will my 04 give a lean condition with this setup

Reply Subscribe

Thread Tools

Search this Thread

#16

10-19-2009, 02:01 PM

BaggedFX2

Member

Join Date: Sep 2009

Location: Richmond, VA

Posts: 58

Likes: 0

Received 1 Like on 1 Post

Thanks for all the replies on this... sounds like the Gryphon is the way to go!

Reply Like

#17

10-19-2009, 02:04 PM

Bluejay

Global Moderator &
Senior Member

Join Date: Mar 2005

Location: Burleson/Athens/Brownsboro, TX

Posts: 26,016

Likes: 3

Received 68 Likes on 64 Posts

Quote:

Originally Posted by BaggedFX2

Thanks for all the replies on this... sounds like the Gryphon is the way to go!

It certainly was for me. If you do not care for the gauges, then the Xcal3 is great. I use my gauges constantly.

__________________
Jim

Reply Like

#18

10-19-2009, 05:58 PM

Grubrunner

Senior Member

Join Date: Sep 2005

Location: Rich, Virginia

Posts: 2,723

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by Bluejay

.... Keep in mind, you can be lean and never know it....

So technically, if you don't know it, then you're not lean.... right?

Reply Like

#19

10-19-2009, 06:02 PM

Bluejay

Global Moderator &
Senior Member

Join Date: Mar 2005

Location: Burleson/Athens/Brownsboro, TX

Posts: 26,016

Likes: 3

Received 68 Likes on 64 Posts

Quote:

Originally Posted by Grubrunner

So technically, if you don't know it, then you're not lean.... right?

No, you are not lean enough to ping, so you are doing a little less damage or, you have bad hearing.

__________________
Jim

Reply Like

#20

04-13-2011, 08:44 PM

navybrat02

Senior Member

Join Date: Oct 2010

Location: CS,TX

Posts: 120

Likes: 0

Received 0 Likes on 0 Posts

Ok bring back an OLD thread!!

Just got my Granatelli CAI w/ MAF and did everything right... Tried to drive it and my truck went into ENGINE FAIL SAFE mode

Please help!! I reflashed my truck back to stock and then redid the tune to Stage 2 Towing. I'm going to try and set it back to stock and see if that does anything. Would taking out the MAF and putting in the stock one be better??

HELP!!!!

Reply Like

#21

04-13-2011, 09:38 PM

88racing

Technical Article Contributor

Join Date: Apr 2009

Location: In the fast lane from LA to Tokyo...

Posts: 10,697

Likes: 0

Received 14 Likes on 14 Posts

Don't ever use an Aftermarket maf unless the truck is tuned for it....put the stock one back in...

Put the truck back to stock and drive it 50-100 miles....
Then reflash to level 2

If it happens again put back to stock....
Disconnect the battery
clean the tb...
Reconnect the battery...
Drive 50-100 miles...
Reflash to level 2 again...

If you haven't already looked into custom tunes and add that to the list also...

Last edited by 88racing; 04-13-2011 at 10:09 PM.

Reply Like