2004 - 2008 F-150
Sponsored by:
Sponsored by: Real Truck

cylinder 4&7 missfire

Thread Tools
 
Search this Thread
 
Old May 5, 2007 | 09:47 PM
  #1  
760red150's Avatar
Thread Starter
|
Member
Joined: Dec 2005
Posts: 68
Likes: 0
From: San Diego, CA
cylinder 4&7 missfire

the check engine turned on and all kinds of codes popped up on my edge. it says "cylinder 4, 7 missfire" and some other codes too. it runs like chit. shakes like crazy. my truck is a 05 and has 77,000 miles on it. time for a tune up? i'll get the other codes and post them later.
 
Reply
Old May 5, 2007 | 09:51 PM
  #2  
kd4crs's Avatar
Technical Article Contributor
Joined: Oct 2004
Posts: 2,551
Likes: 3
From: Central KY
You better check for a stuck injector. Is there smoke pouring out the exhaust? If so, don't run it or try to start it, you may hydrolock the engine. Could also be a bad coil on plug. More than likely it is injectors though.
 
Reply
Old May 5, 2007 | 10:46 PM
  #3  
Rockpick's Avatar
Moderator &
Senior Member
Joined: Jan 2002
Posts: 31,440
Likes: 4
From: The Bluegrass State
Sounds like injectors to me!

Mine did the same thing.... lots of good information about the injector problems in this thread:

https://www.f150online.com/forums/sh...d.php?t=274871
 
Reply




All times are GMT -4. The time now is 05:11 PM.