i like the box idea for the tool, might have to make 1 for mine

 

I just threw a 4.2 cubic box in the back and called it good

 

https://www.f150online.com/forums/me...50644-187.html

 

 

i like that, my problem is that... i have my amp mounted in the middle on the hump.. i have only one 10 inch pioneer thousand watt sub, and i also have speaker boxes id like to have under there haha, but if i could angle the box in those spots it would fit perfect, where is your amp??

 

My amp is under the passenger seat, took the jack out.

 

Here's the box I had in my 1999. Had two Memphis 12s in it. The pictures suck, but that's cause this was before digital cameras were cool...

 

Where did you get this? It's EXACTLY what I want minus the two. I just need one ten. Looks great!

 

Custom built by local stereo shop! Thanks, i like it alot. maybe next time I would do a 10", but I got the two 8's for 50 bucks. Works good enough for me!

 

Any way you can get some dimensions on this thing? I'd like to see if one of the shops here in KC can do it. Not opposed to coming up to Omaha to get one made either. Too bad 29 is closed.

 

I'll get you a picture of mine sometime, but have you thought about building one yourself? It isn't hard at all and as long as you have access to some basic tools it doesn't take too long to do.

 

The only tool you need to make a square/rectangle sub box is a jig saw and a drill. Lowes will cut the sheet of MDF as many times as you want, as long as they are straight lines.

 

i went big when i had my system. haha no back seat.

10 diamond d1 12" on an audiopipe 3k, had 4 interstate batts, a few runs of 2/0 welding cable.

 

But... why?

 

Why lift a truck 10"? Why buy a motorcycle? Why have a drag car? Etc... I like car audio alot and its something i enjoy. Ive had plenty of systems in the truck from a single 8 to a single 10 to two 12s four 12s five 12s etc