hi all,new to forum, i just picked up a 2002 F150 XL 4.2regular cab with 60000miles,retired my 91F150XLT 4X4 to just a wood truck now, The seat in the 02 is very uncomfortable,I am wanting to put somthing else in it,60/40 with fold down armrest maybee ?, wandering my options and what all years and models will fit ? it is grey seat grey interior. thanks in advance. Keith

 

Anything from a 97-2003 should fit just fine. I pulled my 60/40 split bench from my 1998 and put in 2002 bucket seats. I had to tap a couple of holes, but other than that, it was easy.

 

thanks danieldd, the 97-03 ,just regular cab seats ,are ext.cab seats the same? what did you get the buckets out of?

 

as far as I know, they should be the same, so any seat combination from 97 to 03 will work. Like I mentioned earlier, depending on what seats you get, you may have to tap a hole or two, but it really is no big deal. I got a set of 2001 leather bucket seats out of a supercrew. This is what it looked like after I changed them out..





FYI...I'll make you a deal on my 60/40 split with a fold down center console if you're in my neck of the woods....

 

im in s.w. michigan, but my interior is grey. im liking the lariat buckets,did console come from the lariat supercrew also?

 

Nope. I had to search high and low for the console and then I ended up buying it in pieces. The main console without the top came from Michigan (cost me 50 bucks), the console lid came from Colorado (cost me 20 bucks), then I had to get the console cover covered in leather (another 40 bucks), then I had to paint the console as it was originally grey (another 10 bucks). A real big pain for the supercrew console, but I just couldn't find one intact anywhere that was reasonably priced.

 

You should get some buckets and an expy center console.

 

I put a 60/40 in my '99 XL reg cab ... really a great improvement over the stock bench appearance wise. That being said, I drive 100-250 miles a day in my '03 XL work truck, as well as sitting 2-3 hrs. in it doing paper work and have no problems w/ the comfort of the bench seat.

It's an easy conversion. All holes you'll need are already in the cab floor (plugged w/ rubber plugs), but they'll need tapping (2 different size metric taps).

 

I swapped bench:


to Lightning seats:

 

love the look of your seat Danieldd,but im thinking what you have there Failander & Piggington is what i need,still room for 2 adults and 1 kid since i have regular cab. Anyone near S.W. Lower Michigan got something ,im looking ,thanks guys

 

I went w/ the 60/40 to keep the option of 3 people in the truck, but I sure like the look of the buckets/console. One of these days I'm going to wack the 60 portion of my seat down, and get a console (no full length console, unfortunately, due to the 4wd shifter )

 

were u get that mid console..its dont have that goofy look like the ones that go ALLLL the way 2 the dash

 

Hey just to confirm, regular cab seats WILL fit in supercabs correctly?

 

^^ yes.

fordordie, thats the Lariat F-150 console. The one that goes to the dash is an expedition console

 

I too have the XL Bench seat. Compared to my '98 XLT 60/40, it was almost unbearable on the 1000 mile trip home from picking up the truck. Some really nice conversions posted here. I like the SVT setup. When I have some time and money I want to do something like that.