Looking at putting 33x12.50 toyo mts on my 06 f150 but here in pa our tires can not stick out the side. So with that I was wondering what offset to run so my tires will be flush.

 

+35 or so with nine inch wide wheels will keep them near factory specs.

 

Cool sounds good thank you.

 

With the wider tires they will stick out slightly more than stock just due to the width difference in tires. Here is mine with eight inch wide wheels with +25 offset which is similar to nine inch with +35. 315 tires are about 12.3 width. Fairly flush.

 

That's probably the way i will run mine. Thanks for the pictures helped out a lot.

 

You're welcome. Good luck.

 

I didn't know of that little PA rule, i have the toyos in 33x12.5 with +18 offset, stick out about an inch and a quarter past the fender flares. Never been hassled for it.

 

Yeah depends on the cops lol but in PA they can stick out up to 3" if you have flares, but I have a step side and can't seem to find decent looking flares. I liked the bushwhacker pocket style but they don't make them for the step side. At least that I can find.

 

Seeing how you are from Mansfield as well at least I know I should be able to get away with a little extra