tire pressure question

Thread Tools
 
Search this Thread
 
Old Aug 1, 2010 | 04:13 PM
  #1  
bellman's Avatar
Thread Starter
|
Member
Joined: Oct 2007
Posts: 50
Likes: 0
tire pressure question

I'm running bfg at 285/65/18's load range d (max psi 65) on stock fx4 wheels. What is the best psi to run for tread life?
 

Last edited by bellman; Aug 1, 2010 at 04:40 PM.
Reply
Old Aug 1, 2010 | 06:26 PM
  #2  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
I would run them at 45. Do not go lower than 40 if you try other pressures.
 
Reply
Old Aug 1, 2010 | 10:18 PM
  #3  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Yeah, I'd run 40 to 45 psi for daily driving.
 
Reply
Old Aug 2, 2010 | 09:11 PM
  #4  
bellman's Avatar
Thread Starter
|
Member
Joined: Oct 2007
Posts: 50
Likes: 0
Thanks for the info. I've been running them at 40, I bumped them up to 45 to see how they do. I've noticed my front tires are wearing on the outside edges. I just ordered a leveling kit yesterday so I will need to have it aligned after it's installed anyway.
 
Reply
Old Aug 2, 2010 | 09:52 PM
  #5  
canadian_screw's Avatar
Senior Member
Joined: Oct 2009
Posts: 277
Likes: 0
From: Canada
Get it aligned and rotate the tires.
 
Reply
Old Aug 2, 2010 | 10:37 PM
  #6  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
I agree.
 
Reply
Old Aug 5, 2010 | 12:57 PM
  #7  
07newscrew's Avatar
Member
Joined: Jun 2010
Posts: 47
Likes: 0
From: Central PA
Correct BFG T/A Pressure

Question...I have the stock BFG Rugged Trail T/A 275/65-18 on my '07 King Ranch and the placard on the door says to infalte the tires to 35 psig. The label on the tire sidewall says that maximum inflation pressure is 35 psig.

I saw that bellman said his BFG T/A in the same size says maximum tire pressure is 65 psig.

Am I the only one with low pressure BFG's ?

Thanks
 
Reply

Trending Topics

Old Aug 5, 2010 | 01:41 PM
  #8  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
His are a different size and load range, and possibly even a different tire, as he did not say which model. Yours are the OE tires that came from Ford. Other OE brands in the same size, like the Goodyears are a LR C tire and would have a different placard.

Yours are a P series tire (passenger car), a load range B.
 
Reply
Old Aug 5, 2010 | 01:52 PM
  #9  
07newscrew's Avatar
Member
Joined: Jun 2010
Posts: 47
Likes: 0
From: Central PA
Thanks kingfish51. I guess I didn't realize that my OE tires were classified as passenger tires even though my KR has the 7200# GVW and towing packages. That's probably why the truck rides and handles so nicely.

I do want to upgrade to a larger size 18" on the stock rim. Any suggestions? My truck isn't lifted but I will probably put the Bilstein 5100's on it to level it. I was thinking of going to an LT285/65-18 BFG T/A. Heard some good things about it on these forums.

 
Reply
Old Aug 5, 2010 | 01:55 PM
  #10  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
The TAs are good tires, I run them for winter tires. The tires you mention are a LR E tire, with a max pressure of 80. A bit of overkill on an F150, but will still work well. You will notice the ride will be a bit harsher, and you will have to run them at about 50 psi rather than 35.
 
Reply
Old Aug 5, 2010 | 02:02 PM
  #11  
07newscrew's Avatar
Member
Joined: Jun 2010
Posts: 47
Likes: 0
From: Central PA
I'll take those things into consideration when I go to buy tires. Thanks for the feedback.
 
Reply
Old Aug 5, 2010 | 03:31 PM
  #12  
zxrider11's Avatar
Member
Joined: Feb 2008
Posts: 24
Likes: 0
From: West Michigan
The BFG AT TA also comes in a 275/70-18 size.

They give a little more sidewall, and measured 33.2" in diameter. And they are considerably cheaper that the 285/65-18'.
 
Reply
Old Aug 5, 2010 | 03:57 PM
  #13  
nu-supercrew's Avatar
Technical Article Contributor
Joined: Apr 2005
Posts: 893
Likes: 2
From: New York
Originally Posted by wandell
Yeah, I'd run 40 to 45 psi for daily driving.

I have the BFG AT/TKO 285's and have been running 40 psi for the last 20k. Getting ready for a small trip this weekend and checked tire pressure. All good. On a whim I upped the pressure to 50psi. Immediately noticed a much firmer ride. I think I'll do 50psi up and 45 on the way back... see what's what.
 
Reply
Old Aug 5, 2010 | 06:28 PM
  #14  
kingfish51's Avatar
Senior Member
Joined: Dec 2003
Posts: 6,550
Likes: 2
From: Mount Airy,MD
Originally Posted by nu-supercrew
I have the BFG AT/TKO 285's and have been running 40 psi for the last 20k. Getting ready for a small trip this weekend and checked tire pressure. All good. On a whim I upped the pressure to 50psi. Immediately noticed a much firmer ride. I think I'll do 50psi up and 45 on the way back... see what's what.
At 40, you are at half or less of the load carrying ability of the tire. The GAWR of the F150 is about 4k per axle. At 40 psi, a LR E 80 psi tire doesn't even come close to be able to carry that load.

If your vehicle had come with a TPMS setup and those tires, it would have been set to show low pressure at 46psi.
 
Reply
Old Aug 6, 2010 | 02:46 PM
  #15  
nu-supercrew's Avatar
Technical Article Contributor
Joined: Apr 2005
Posts: 893
Likes: 2
From: New York
Originally Posted by kingfish51
At 40, you are at half or less of the load carrying ability of the tire. The GAWR of the F150 is about 4k per axle. At 40 psi, a LR E 80 psi tire doesn't even come close to be able to carry that load.

If your vehicle had come with a TPMS setup and those tires, it would have been set to show low pressure at 46psi.
ok
Just got off phone with BFG customer service. They calculated that for regular driving, optimum pressure for those tires on my '05 supercrew to be 41-43 psi.
(Tires ar LT 285 D load range. max pressure 65psi)
 
Reply



All times are GMT -4. The time now is 01:40 PM.